Filler for Gaps in Floorboards and Joints - Wudcare - Brown
Wudcare Floorboard Gap And Joint Filler is a quick drying and low odour filler based on a flexible...Wudcare Floorboard Gap And Joint Filler is a quick drying and low odour filler based on a flexible water-borne, non-yellowing acrylic resin. It is designed for use in combination with saw or sanding dust from carpentry work to create a colour-matched filler for gaps between flooring boards and joints. This flexible, highly bodied acrylic emulsion is suitable for filling gaps or joints in woodwork up to 2 mm. It is non-yellowing, low odour, quick drying, and water-washable. Please note: this product is unsuitable for gaps wider than 2 mm, and should not be used on gaps within planks or on end-grain floors.
This guide is for anyone looking to seamlessly fill gaps in their wooden flooring using Wudcare Floorboard Gap and Joint Filler. The key benefit is a quick-drying, color-matched solution that blends seamlessly with your existing flooring. A caveat: this product is only suitable for gaps up to 2mm wide.
All features
Colour
Brown
Model Part Number
WCFBGF1000
Brand
Wudcare
Extended Product Information
FAQs
What is the shelf life of Wudcare Floorboard Gap and Joint Filler?
Check the product packaging for the specific expiration date. Proper storage in a cool, dry place can extend its shelf life.
Can I use this product on laminate flooring?
No, this product is designed for use with wood flooring only.
How long should I wait before sanding the filled area?
Allow the filler to dry completely, typically a few hours, before sanding. Drying times can vary depending on environmental conditions.
Is the filler waterproof?
The filler is water-resistant once dry, but it's not fully waterproof. Avoid prolonged exposure to water.
What tools do I need to apply the filler?
You'll need a putty knife or similar tool for application and potentially sandpaper for finishing.
Can I stain the filler after it dries?
Yes, you can stain the filled area after it has completely dried. Ensure the stain is compatible with the filler and the surrounding wood.
What should I do if I get the filler on my skin?
Wash the affected area with soap and water.
Troubleshooting
Filler is not matching the floor color.
Ensure you are using sawdust from the same wood type as your flooring. Adjust the ratio of filler to sawdust until you achieve the desired color match.
Filler is cracking after drying.
This typically indicates the gap is too wide. This product is designed for gaps up to 2mm. Consider alternative fillers for larger gaps.
Filler is not drying properly.
Ensure the application area is well-ventilated and that the product is within its shelf life. Excess humidity can also affect drying times.
Pros and Cons
Pros
Quick drying time minimizes project delays.
Low odor makes it suitable for indoor use.
Creates a color-matched finish for seamless repairs.
Water-washable for easy cleanup.
Flexible formula helps prevent cracking.
Non-yellowing ensures long-lasting color stability.
Cons
Limited to gaps up to 2mm wide.
Not suitable for gaps within planks.
Not suitable for end-grain floors.
Requires sawdust from your specific flooring type for color matching.
Setup, Compatibility & Care
Setup:
Preparation: Ensure the floor is clean, dry, and free of any existing finishes.
Mixing: Mix the filler with saw or sanding dust from your wood to achieve the desired color match.
Application: Use a putty knife or similar tool for applying the filler. Press firmly to ensure the filler penetrates the gap.
Compatibility:
Compatible with a wide range of wooden flooring.
Best results are achieved with wood dust from your specific floor type.
Ensure compatibility with any existing finishes before application.
Care:
Clean up any spills or excess filler immediately with water while it is still wet.
Allow the filled areas to dry completely before walking on them.
Protect the filled areas from heavy impact or abrasion for the first few days.