Genuine AL-KO friction linings for AKS 2000, AKS 2004, and AKS 3004. Part number 1220755.
Best current price£47.99from eBay
Shopping.co.uk recommended and popular offers
eBay£47.99Visit shop AL-KO AKS 2700/2004/3004 Friction Pad Set (1220755)
Visit shop1 offer from £47.99
View price history by clicking the chart icon.
These genuine AL-KO friction pads (part number 1220755) are designed for AKS 2000, AKS 2004, and AKS 3004 stabilisers. They provide crucial friction for enhanced safety and stability during towing, ensuring a smoother and more controlled journey. A key benefit is their role in reducing sway and snaking motions. However, they require proper installation to function effectively and must be checked periodically for wear.
| Model Part Number | 1220755 |
|---|---|
| Brand | AL-KO |
It is recommended to check your friction pads at the beginning of each towing season and periodically throughout, especially after long journeys or if you notice any changes in towing performance. Look for visible wear or glazing.
No, these friction pads are genuine AL-KO parts designed specifically for the AKS 2000, AKS 2004, and AKS 3004 stabiliser systems. Using them with incompatible systems may result in poor performance or safety issues.
The lifespan varies greatly depending on usage, towing conditions, and maintenance. They are wear items and will need replacement when worn. Regular inspection is key to determining when replacement is necessary.
Replacement typically requires basic tools such as wrenches or sockets. Refer to your AL-KO AKS manual for specific tool requirements and detailed replacement instructions.
Worn friction pads will significantly reduce the effectiveness of your stabiliser system, leading to increased caravan sway and a less secure towing experience. This compromises safety.
You can clean them with a dry, lint-free cloth to remove dust and debris. Avoid using any cleaning agents, lubricants, or water, as these can degrade the friction material and reduce performance.
Check if the friction pads are worn out and need replacement. Ensure the pads are correctly seated and that the towball is clean and free from grease or debris.
This can sometimes occur if the pads are new and bedding in, or if they are dirty. Ensure the towball is clean. If noise persists, check for proper pad alignment and consider if replacement is needed.
Ensure the towball is clean and free of any foreign material. Check that the friction pads are not excessively worn or damaged, which could impede smooth operation.
Compatibility: These friction pads are specifically designed for AL-KO AKS 2000, AKS 2004, and AKS 3004 stabiliser systems. Ensure your stabiliser model matches this specification before purchasing. The part number is 1220755.
Setup: Replacement of friction pads typically requires careful disassembly of the stabiliser head. It is recommended to consult your AL-KO AKS manual for detailed installation instructions. Ensure the new pads are correctly seated and secured as per the manufacturer's guidelines. Over-tightening or incorrect seating can damage the pads or the towball.
Care: Friction pads are wear items. Periodically inspect the pads for signs of wear, glazing, or damage. If the pads appear significantly worn down or have developed a smooth, shiny surface (glazing), they should be replaced. Clean the pads and the towball with a dry, lint-free cloth if they become dirty. Avoid using lubricants or degreasers on the friction surfaces, as this will reduce their effectiveness.
