Prym Iron On Interfacing - White
Best current price£7.99from Minerva
Best offers
Shopping.co.uk recommended and popular offers
Minerva£7.99Visit shop Minerva Dressmakers On Interfacing White Iron Prym 968200
Visit shopMinerva£7.99Visit shop One Offer
1 offer from £7.99
View price history by clicking the chart icon.
Product Information
Full details
This Prym Dressmakers Iron On Interfacing is designed for sewers looking to add structure and stability to fabric components like collars, cuffs, and lapels. Its key benefit is providing professional-looking stiffness with an easy iron-on application. A potential caveat is that it is best suited for specific fabric applications and may not be ideal for all garment types. This white interfacing, made from 50% polyester and 50% viscose, measures 90 x 45 cm and is washable and dryer-safe.
All features
| Model Part Number | 968200 |
|---|---|
| Brand | Prym |
Extended Product Information
FAQs
What is dressmaker's interfacing used for?
It's used to add stability, shape, and stiffness to specific fabric areas like collars, cuffs, lapels, and pocket openings, preventing them from becoming limp or distorted.
How do I know which side of the interfacing to iron onto the fabric?
The interfacing has a slightly rougher or shinier side which contains the adhesive. This is the side that should be placed against the fabric and ironed.
Can I use this interfacing on any fabric?
It's best suited for fabrics that can withstand medium-high heat ironing. Always test on a fabric scrap first, especially with delicate materials like silk or very fine synthetics.
What temperature should I use to iron it on?
Set your iron to a medium-high heat setting (usually suitable for cotton or linen), and generally avoid using steam during the initial application.
How long should I press the iron onto the interfacing?
Press the iron firmly onto the interfacing for approximately 8-12 seconds. Ensure you cover the entire area without sliding the iron.
Can the finished item be washed?
Yes, the interfacing is washable at up to 40 degrees Celsius. It is also dryer-safe and can be ironed.
What are the dimensions of this interfacing?
The interfacing measures 90 cm in width and 45 cm in depth.
Troubleshooting
Interfacing not sticking properly
Ensure your iron is hot enough (suitable for the fabric) and that you are pressing firmly for the recommended time. Check that the adhesive side of the interfacing is facing the fabric. Avoid using steam during application as it can interfere with the bond.
Fabric puckering after application
This can happen if the iron is dragged rather than pressed, or if steam was used. Ensure a firm, stationary press. Allow the fabric to cool completely before moving it. If the issue persists, try a slightly lower iron temperature.
Interfacing feels too stiff
For finer fabrics or softer drape requirements, consider using a lighter-weight interfacing. For this specific product, ensure it is cut precisely to the needed area and not applied unnecessarily large.
White interfacing shows through thin fabric
Test on a fabric scrap first. For very thin or translucent fabrics, consider using a very lightweight interfacing or a colored interfacing if available and appropriate for the project.
Pros and Cons
Pros
- Adds professional structure and crispness to garment details.
- Simple and quick to apply with an iron.
- Washable and dryer-safe for easy garment care.
- Versatile for various sewing projects requiring fabric stabilization.
- Good value for its size and functionality.
Cons
- Best suited for medium to heavyweight fabrics; may be too stiff for very delicate materials.
- Requires an iron for application, not suitable for no-sew projects.
- Specific size may require cutting for smaller applications.
- White color might show through very thin or light-colored fabrics if not applied carefully.
Setup, Compatibility & Care
Setup:
- Cut the interfacing to the desired shape and size for your fabric piece.
- Place the fabric piece right side down on your ironing board. Place the interfacing, adhesive side down, onto the fabric where reinforcement is needed.
- Set your iron to a medium-high heat setting (suitable for your main fabric), generally without steam.
- Press the iron firmly onto the interfacing for 8-12 seconds, moving it slightly. Ensure all areas are bonded.
- Allow the fabric to cool completely before handling.
Compatibility:
This interfacing is compatible with most natural and synthetic fabrics that can withstand ironing at medium-high temperatures. It is particularly effective with cottons, polyesters, and blends commonly used in dressmaking.
Care:
Finished garments with this interfacing can be machine washed at up to 40 degrees Celsius. It is also dryer-safe on a low setting and can be ironed as needed. For professional cleaning, it can be treated with perchloroethylene.