Best current price£6.49from B&Q
Shopping.co.uk recommended and popular offers
B&Q£6.49Visit shop B&Q - Pz Pan Head Zinc-Plated Hardened Steel Self-Drilling Screw (Dia)3.5mm (L)9.5mmPack Of 25
Visit shop1 offer from £6.49
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and builders needing reliable fasteners for various projects. The key benefit is the self-drilling capability, reducing the need for pre-drilled holes. A caveat is that they are best suited for softer materials like wood or thin metal.
| Colour | Silver |
|---|---|
| Brand | Diall |
Self-drilling means the screw has a specially designed tip that can bore its own hole into the material, eliminating the need to pre-drill a pilot hole.
They are best suited for wood, softer plastics, and thin gauge sheet metal. They may not be effective in very hard woods or thick metals.
You will need a Pz (Pozidriv) screwdriver bit. Ensure it is the correct size for the screw head.
The zinc plating offers some corrosion resistance, making them suitable for protected outdoor environments. For prolonged or harsh outdoor exposure, screws with better corrosion resistance are recommended.
These screws have a pan head, which is a slightly rounded, flat-topped head that sits on top of the material.
Avoid over-driving the screw, especially into very dense materials. Ensure you are using the correct driver bit and applying steady pressure. Do not use excessive force.
Ensure you are using a compatible driver bit (Pz). Check if the material is too hard for this type of screw. Apply steady, firm pressure while driving.
Verify you are using the correct Pz bit and that it is in good condition. Reduce driving speed and pressure. Ensure the bit is fully seated in the screw head.
Store screws in a dry, climate-controlled environment. Avoid exposure to moisture. For critical applications, consider screws with higher corrosion resistance like stainless steel.
Setup: Use a power drill or driver fitted with the correct Pz (Pozidriv) bit. Ensure the screw is aligned straight with the material before driving. Drive the screw until the pan head is flush with the surface or at the desired depth.
Compatibility: These screws are primarily designed for use with wood and softer plastics. They can also be used for thin gauge sheet metal. Avoid using them in very hard woods or thick metals, as this may damage the screw or the tool.
Care: Store screws in a dry environment to prevent premature corrosion. Clean any debris from the screw head before driving to ensure proper grip with the driver bit.
