Oxford Mint All Weather Lube 500ml - PTFE - Long Lasting

This lube is specifically formulated for wet weather. While its PTFE content offers some protection in dry conditions, it may attract more dust than a dedicated dry lube. For best results, use it in wet or mixed conditions.

Application frequency depends on riding conditions. In wet or muddy conditions, reapply after every long ride or when you hear noise. In drier conditions, you might get away with reapplying every few rides, ensuring to wipe off excess.

The minty scent is present during application. It is not designed to be a long-lasting fragrance on the bike.

Yes, you can use this lube on a new chain. It's recommended to clean off any factory grease first for optimal performance and adhesion.

No, the product information states it is not tested on animals.

PTFE (Polytetrafluoroethylene) is a synthetic fluoropolymer known for its low friction properties. It helps to fill the gaps between moving parts, reduce wear, and improve lubrication, especially under pressure.

Use a degreaser and a chain cleaning tool or brush to remove old lubricant and grime. Rinse thoroughly and dry completely with a rag or allow to air dry before applying the Oxford Mint All Weather Lube.

Ensure the chain was thoroughly cleaned and dried before application. Reapply, allowing more time for penetration, and wipe off excess thoroughly. Check for any obvious obstructions or damage to the chain.

You may have applied too much lubricant. Ensure you wipe off all excess from the outside of the chain thoroughly after application.

While the lube offers corrosion protection, heavily saturated conditions may require more frequent reapplication or a more intensive chain cleaning. Ensure all parts of the chain are coated and excess wiped.