Setup, Compatibility & Care
Preparation:
Ensure surfaces are clean, dry, and free from dust, grease, and mildew. Fill any cracks or holes and sand smooth. For previously painted surfaces, lightly sand to ensure adhesion. Prime bare plaster, or porous surfaces with a suitable primer.
Application:
Stir the paint thoroughly before use. Apply with a brush or roller. For best results, apply two thin coats. Allow adequate drying time between coats (typically 2-4 hours, but refer to the product can for specific times).
Compatibility:
This paint is suitable for interior walls and ceilings. It is compatible with most standard interior surface primers.
Care:
Clean application tools immediately after use with warm soapy water. To clean painted surfaces, use a soft cloth slightly dampened with water. Avoid abrasive cleaners or excessive scrubbing, as this can damage the matt finish.