Tsukineko Brilliance Pigment Orchid Stamp Pad - DewDrop

Drying time varies by surface, material, and humidity. On uncoated paper, expect 10-15 minutes. On non-porous surfaces like plastic or coated paper, drying may take significantly longer and could be prone to smudging until fully cured.

While the product information lists various surfaces, fabric is not explicitly mentioned. Test on a scrap piece of fabric first, as ink behavior can vary greatly. Heat setting might be required for permanence on fabric.

Clean stamps immediately after use with a dedicated stamp cleaner or a solution of mild soap and water. Pigment inks can be more difficult to remove than dye inks, so prompt cleaning is recommended.

Brilliance inks are water-based pigment inks. Once fully dry and cured, they offer good water resistance, but are not typically considered fully waterproof without a sealant, especially on non-porous surfaces.

Gently apply the recommended Tsukineko Brilliance Pigment Ink refill to the dried areas of the pad. Allow the ink to absorb for a few minutes, then blot with a clean cloth or sponge to distribute evenly before use.

The Dewdrop shape is ergonomically designed for a comfortable grip and allows for versatile application. You can use the pointed tip for detailed work or fine lines, and the broader edges for larger coverage or different stamping effects.

It is generally recommended to use the specific ink type the pad is designed for (Tsukineko Brilliance Pigment Ink) to maintain optimal performance and longevity of the pad. Mixing different ink bases can lead to unpredictable results.

Ensure the pad is adequately inked. If it feels dry, re-ink with the appropriate Tsukineko Brilliance Pigment Ink refill. Check that you are using the correct side of the dewdrop pad for optimal ink transfer.

The ink may not be fully dry. Allow more drying time, especially on non-porous surfaces. Consider using a quick-drying spray or sealant if smudging remains an issue after adequate drying.

Ensure the air-tight cap is fully closed after each use. Store the pad away from heat sources and direct sunlight. If the pad has dried out significantly, re-ink it with the appropriate refill ink.

Gently blot the pad with a slightly damp cloth to revive the ink surface. Ensure the stamp is making full contact with the pad and the surface being stamped.