Fuse - 5A
Best current price£4.85from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£4.85Visit shop - 5A Fuse (Dia)6.3mmPack Of 20
Visit shopB&Q£4.85Visit shop One Offer
1 offer from £4.85
View price history by clicking the chart icon.
Product Information
Full details
This guide is for anyone needing reliable replacement fuses for their electrical devices. The key benefit is ensuring proper circuit protection with a pack of 20 standard 5A fuses. A caveat is that these are specifically 5A fuses and not suitable for circuits requiring different amperage ratings.
All features
| Brand | B&Q |
|---|
Extended Product Information
FAQs
What does 5A mean on a fuse?
5A refers to 5 Amperes, which is the unit of electric current. A 5A fuse is designed to protect a circuit from overcurrent by blowing (breaking the circuit) when the current exceeds 5 Amperes.
How do I know if I need a 5A fuse?
Check the device's manual, the label on the device itself, or the rating printed on the old fuse. It will specify the required amperage rating.
Can I use a higher amperage fuse if the 5A one keeps blowing?
No. Using a fuse with a higher amperage rating than specified is dangerous. It can lead to overheating, damage to the appliance, and pose a fire risk.
What is the diameter of these fuses?
These fuses have a diameter of 6.3mm.
Are these fuses suitable for all electrical devices?
No, they are only suitable for devices that specifically require a 5A fuse with a 6.3mm diameter. Always check the device's specifications.
How should I store these fuses?
Store them in a cool, dry place, preferably in their original packaging, to keep them clean and protected.
Troubleshooting
Fuse blows immediately after replacement
This indicates a persistent short circuit or a device drawing significantly more power than the fuse rating. Unplug the device immediately and seek professional repair. Do not attempt to use a higher rated fuse.
Device not powering on after fuse replacement
Ensure the new fuse is correctly seated in the holder and that the holder is properly closed. Verify that the fuse rating (5A) is correct for the device. If the problem persists, the device may have another fault.
Pros and Cons
Pros
- Cost-effective multi-pack
- Standard 5A rating for broad compatibility
- Reliable protection against overcurrent
- Easy to install as a direct replacement
Cons
- Specific to 5A circuits only
- Not suitable for high-power appliances
- Requires careful identification of correct amperage
Setup, Compatibility & Care Instructions
Setup:
- Identify the blown fuse: Visually inspect the fuse or note which device it belongs to.
- Turn off power: Ensure the appliance or device is unplugged from the power source.
- Locate fuse holder: Open the fuse holder, often a small cap or drawer on the device.
- Remove old fuse: Carefully slide out the old fuse.
- Insert new fuse: Place the new 5A fuse into the holder.
- Close holder and restore power: Secure the fuse holder and plug in the device.
Compatibility:
- These fuses are compatible with any device or fuse holder that requires a 5A rating and accepts a 6.3mm diameter fuse.
- Crucially, always verify the required amperage rating for your specific device before replacing a fuse. Using a fuse with a higher amperage rating than specified can lead to appliance damage or fire hazard.
Care:
- Store fuses in a cool, dry place away from direct sunlight.
- Keep the pack in its original packaging to prevent damage or contamination.
- Handle fuses by their non-metallic ends to avoid transferring oils or dirt.