CarPlan Polar White Snow Foam works quickly to coat your vehicle in a dense, fragrant cleaning foa...CarPlan Polar White Snow Foam works quickly to coat your vehicle in a dense, fragrant cleaning foam, specially formulated to lift oil, dirt and road grime from your vehicle with ease. The CarPlan Polar White Snow Foam can be used as a pre-treatment before a full shampoo, or as a shampoo application. For best results, seal with a good quality wax to achieve a glossy, streak-free shine. Does not strip waxes or sealant layers. Developed for use with a pressure washer. Directions for use: Shake the bottle well before use. Use your pressure washer to rinse the vehicle from bottom to top with clean water. Pour 100ml of CarPlan Polar White Snow Foam into a 1 litre snow foam lance bottle and fill with water. Spray on to the surface of your vehicle working from bottom to top. To use as a Pre-wash: Let the foam settle for approximately 5 minutes - do not allow the foam to dry on the vehicle surface. After 5 minutes, rinse with a pressure washer, working from bottom to top. To use as a Shampoo: If using the snow foam as a shampoo, agitate the surface of the vehicle using a sponge, cloth or wash mitt. After agitating the surface, rinse with a pressure washer working from bottom to top. Note: Do not use in direct sunlight or when surfaces are hot. Store container in an upright position and secure when transported.
CarPlan Snow Foam Ultra Thick Car Shampoo Vehicle Valeting Cleaner 2.5LFree delivery in 1–3 days£16.99Visit shop →
Product Information
Full details
This guide helps you effectively use CarPlan Polar White Snow Foam to clean your vehicle. It's designed for car owners looking for an easy and effective way to remove dirt and grime. The snow foam quickly coats your vehicle, lifting away contaminants. A key point is that it's designed for use with a pressure washer. For best results, it's recommended to follow the instructions carefully to achieve a clean, streak-free shine.
All features
Brand
CarPlan
Extended Product Information
FAQs
How much snow foam should I use?
Pour 100ml of CarPlan Polar White Snow Foam into a 1-liter snow foam lance bottle and fill with water.
Can I use it in direct sunlight?
No, avoid using the snow foam in direct sunlight or on hot surfaces to prevent it from drying too quickly.
What is the best way to rinse off the foam?
Rinse the vehicle thoroughly with a pressure washer, working from top to bottom.
Does this product strip wax?
No, CarPlan Polar White Snow Foam is designed not to strip waxes or sealant layers.
How long should I let the foam sit on my car?
If using as a pre-wash, let the foam settle for approximately 5 minutes before rinsing.
Can I use this product on all types of vehicles?
Yes, it is suitable for use on most vehicle types.
Troubleshooting
Foam is not as thick as expected.
Ensure the snow foam lance is correctly adjusted. Check water and snow foam concentrate ratios.
Streaking after rinsing.
Make sure you have rinsed the vehicle thoroughly from top to bottom. Avoid letting the foam dry on the surface.
Poor cleaning performance.
Ensure the correct amount of snow foam is used and the vehicle is rinsed properly. For stubborn dirt, pre-wash may be needed.
Pros and Cons
Pros
Quick and easy application with a pressure washer.
Effective at removing various types of dirt and grime.
Safe for use on waxed or sealed surfaces.
Leaves a clean and glossy finish.
Pleasant fragrance enhances the cleaning experience.
Cons
Requires a pressure washer for use.
Best results are achieved when used in the shade or on a cool surface.
May require more than one application for heavily soiled vehicles.
Requires the purchase of a snow foam lance.
Setup, Compatibility & Care
Preparation: Ensure you have a pressure washer and a snow foam lance. Shake the CarPlan Polar White Snow Foam bottle well before use.
Application: Rinse your vehicle with clean water from bottom to top. Pour 100ml of snow foam into the snow foam lance bottle and fill with water.
Spraying: Apply the foam to the vehicle, working from bottom to top, covering all surfaces.
Rinsing: If used as a pre-wash, let the foam settle for about 5 minutes, then rinse thoroughly. If used as a shampoo, agitate the surface before rinsing.
Important: Avoid using in direct sunlight or on hot surfaces. Store the container upright and secure during transport.