Russell Hobbs Convector Heater - 2000W - Touch Control

Refer to the user manual for detailed instructions, but typically, you can set the timer using the control panel or the remote to specify when the heater turns on and off.

The heater includes overheat protection and tip-over protection, which automatically shuts off the heater if it gets too hot or is knocked over.

Unplug the heater and allow it to cool completely. Wipe the exterior with a soft, damp cloth. Do not use harsh chemicals.

No, the heater is not designed for use in bathrooms or near water sources due to safety concerns.

Please refer to the product documentation or the retailer's information for specific warranty details.

The heater typically has three heat settings: 800W, 1200W, and 2000W, allowing you to adjust the heat output.

Maintain a safe distance from walls and furniture to ensure proper air circulation. Always refer to the user manual for specific distance recommendations.

Check that the heater is plugged in and the power outlet is working. Ensure the tip-over protection is not activated (if applicable), and that the power switch is turned on.

Ensure the thermostat is set to a high enough temperature. Make sure the room size is within the heater's capacity (20m²). Check for any obstructions blocking the airflow.

Check the batteries in the remote and replace them if necessary. Make sure there are no obstructions between the remote and the heater.

This is common when the heater is first used. If the smell persists, unplug the heater and check for dust or debris on the heating elements. If the smell continues, discontinue use and contact customer support.