Best current price£3.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£3.99Visit shop B&Q - 4 X 5 mm Simplex Rope Clip Clamp Fixing Loose Ends Of WireJute And Polypropylene Ropes
Visit shop1 offer from £3.99
View price history by clicking the chart icon.
This guide is for individuals and professionals needing a reliable method to secure wire rope loops. The SolaDirect 4 x 5 mm Simplex Rope Clip Clamp offers a robust solution for creating secure connections, allowing for easy attachment to other cables or equipment like thimbles and turnbuckles. A key benefit is its versatility, suitable for both wire rope and certain synthetic ropes. However, users must ensure the clamp's specified diameter precisely matches the rope size for optimal safety and performance.
| Brand | SolaDirect |
|---|
Its primary function is to securely fasten the loose end of a rope loop back onto the standing part of the rope, creating a strong and reliable termination.
This clamp is specifically designed for ropes with a diameter of 4 x 5 mm. Always match the clamp size to your rope diameter.
Yes, the SolaDirect Simplex Rope Clip Clamp is suitable for use with jute and polypropylene ropes, in addition to wire ropes.
For optimal safety and security, it is generally recommended to use at least two clamps per loop. Ensure they are installed correctly and tightened properly.
If the clamp is too large, it will not be able to grip the rope effectively, leading to a weak or failed connection. This compromises the safety of the entire assembly.
Regular inspection is crucial, especially after initial use and periodically thereafter. Check for any signs of wear, damage, or loosening of the nuts.
Re-tighten the nuts firmly. Ensure the clamp is positioned correctly on the rope, with the U-bolt on the dead end. If the rope is slipping, the clamp may be the wrong size or the rope material is unsuitable.
Verify that the clamp's specified diameter (4 x 5 mm) accurately matches the diameter of the rope being used. Using a clamp that is too small will not fit, and one that is too large will not provide a secure grip.
Clean the clamp with a dry cloth. For light corrosion, a wire brush can be used gently. If corrosion is severe or compromises the clamp's integrity, it should be replaced to ensure safety.
Setup: To use the Simplex rope clip clamp, form a loop in the wire rope. Place the clamp over the loose end and the standing part of the rope, ensuring the U-bolt is on the 'dead' or loose end and the saddle is on the 'live' or standing part. Tighten the nuts evenly and securely. For optimal strength, it's recommended to use at least two clamps per loop, with the second clamp placed a short distance from the first, oriented in the same direction. Ensure all nuts are fully tightened before applying load.
Compatibility: This clamp is specified for 4 x 5 mm ropes. It is suitable for wire rope, jute, and polypropylene ropes. Always verify the rope diameter matches the clamp specification for safe use. It is designed to work with standard rigging hardware such as thimbles and turnbuckles.
Care: Inspect the clamp regularly for signs of wear, corrosion, or damage. Ensure nuts remain tight, especially after initial use and periodically thereafter. Clean with a dry cloth; avoid abrasive cleaners. Store in a dry environment when not in use.
