Toolpak SDS Plus Drill Bit Set - 1000mm - 3 Piece

These drill bits are designed for use with brick, stone, concrete, and other masonry surfaces.

No, these bits are specifically designed for masonry and are not suitable for metal or wood.

Insert the bit into the SDS Plus chuck and secure it by pulling back on the chuck sleeve and releasing.

The two-flute helix design allows for cleaner, faster drilling and rapid dust removal.

The drill bits are 1000mm long.

These bits are designed for use with SDS Plus rotary or percussion drills.

Store the bits in a dry place to prevent rust. Clean them after use to remove debris.

Reduce pressure and speed, and use the reverse function to remove the bit. Make sure the hole is clear of debris.

Check if the bit is compatible with the material. Ensure the drill is set to the correct mode (percussion for masonry). Inspect the bit for damage or wear.

Reduce pressure and speed. Use the reverse function to remove the bit. Ensure the hole is clear of debris.

Reduce drilling speed. Allow the bit to cool down periodically. Ensure proper dust removal.