John Guest Speedfit Flexible Hose - 22mm x 3/4", 300mm
John Guest Speedfit x union nut flexi hose (braided) for the connection of pipe to a male thread a...John Guest Speedfit x union nut flexi hose (braided) for the connection of pipe to a male thread appliance, such as a tap. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release. The John Guest Speedfit x union nut flexi hose is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. Speedfit push-fit flexi hose for the connection of plastic and copper pipe to a male thread appliance. Connectors use a grip then seal collet arrangement. This hose is ideal for the connection of taps. Simply push the fitting fully on to the pipe and screw the nut on to the thread of the appliance. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Note: With all plastic pipes the relevant manufacturer’s pipe insert is required. Easy to use with reduced installation time Designed to withstand vibration and thermal expansion With all plastic pipes the relevant manufacturer’s pipe insert is required Can only be used for hot and cold water at a pressure of 6 bar with the maximum temperature being 65-degree celsius Not suitable for central heating system Kite marked to BS 7291 Parts 1, 2 and 3 The Speedfit system should not be used on an uncontrolled heat source WRAS approved Push-fit and demountable connections Flexi hoses are manufactured to a high quality you would expect from Speedfit. The hoses are suitable for hot and cold water services, have a working pressure of 10 Bar and have WRAS and NHBC approval. Length: 300mm. Push-fit Solution for Plumbing & Heating Systems For use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes Speedfit fittings can be used with copper pipe to BS EN 1057 and Speedfit cross-linked polyethylene (PEX) Barrier Pipe to BS7291. NOT to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards Speedfit products are designed and manufactured under a fully integrated system assessed by B.S.I. to BS EN ISO9001. They are approved by the Water Regulations Advisory Scheme and BBA. Speedfit PEM and PKM fittings and Speedfit barrier pipe are kitemarked to BS7291 Part 1 and 3, Class S. (Licence No. KM39767). Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings. Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight. When used outdoors protect from ultra violet light by lagging or painting. It is recommended that all installations are checked prior to use to determine that a seal has been made.
Best current price£9.78from City Plumbing GB
Best offers
Shopping.co.uk recommended and popular offers
City Plumbing GB£9.78Visit shop ›Jg Speedfit Men's To Union Nut 22Mmx3/4" Flexible Hose, 300Mm Length (Braided) Flx22p
Visit shop ›