Evolution Aqua Eazy Pod Complete Automatic UV Pond and Koi Filter System - Green

Best current price£849.95from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£849.95Visit shop B&Q - Eazypod Auto Uv Pond FilterGreen
Visit shop
Best current price£849.95from B&Q
Shopping.co.uk recommended and popular offers
B&Q£849.95Visit shop B&Q - Eazypod Auto Uv Pond FilterGreen
Visit shop2 offers from £849.95
View price history by clicking the chart icon.
The Evolution Aqua EazyPod Automatic UV Pond Filter (Green) is designed for garden pond owners with ponds up to 10,000 litres seeking a low-maintenance, effective water clarification solution. Its key benefit is automated cleaning cycles, significantly reducing manual upkeep and ensuring consistently clear and healthy water. A caveat is that it requires a separate pond pump and is designed for pump-fed installations only. This award-winning system combines mechanical and biological filtration with an integrated UV clarifier to combat green water and promote a healthy aquatic environment.
| Colour | Green |
|---|---|
| Brand | Evolution Aqua |
The EazyPod Automatic is designed for garden ponds up to 10,000 litres.
No, the pond pump is not supplied with the EazyPod Automatic. You will need to provide your own compatible pump.
No, the EazyPod Automatic is exclusively designed for pump-fed installations, where the pump supplies water to the filter.
The cleaning cycle frequency can be adjusted using the integrated control box timer to suit your pond's needs.
The UV bulb and quartz sleeve should be inspected and cleaned periodically, typically annually, for optimal performance. The UV bulb itself should be replaced every 12 months.
K1 Micro media provides a large surface area for beneficial bacteria to colonize, facilitating efficient biological filtration and helping to maintain healthy water quality.
The EazyPod Automatic is available in both Grey and Green models.
Check the timer settings on the control box. Ensure the power supply to the control box is active and the waste valve is not obstructed.
Ensure the UV bulb is functioning and has been replaced within the last 12 months. Check that the flow rate through the filter is not too high, reducing UV contact time. Verify K1 media is agitating correctly.
Check the pond pump's intake for blockages. Inspect the pipework for kinks or obstructions. Clean the filter's mechanical pre-filtration stages if applicable.
Ensure there are no obstructions in the waste outlet pipe. Check electrical connections to the waste valve actuator. The control box timer may need adjustment.
Setup:
Compatibility:
Care: