Best current price£124.00from Homebase
Shopping.co.uk recommended and popular offers
Homebase£124.00Visit shop Stonecare4u Essential Matt Finish Sandstone Sealer 5L 3 Pack
Visit shop
B&Q£124.95Visit shop - Stonecare4USandstone Sealer Matt (Dry) Finish (15L)Highly Effective Sealer For Sandstone
Visit shop4 offers from £124.00 - £124.95
View price history by clicking the chart icon.
This StoneCare4U Essential Matt Finish Sandstone Sealer in Green is designed for owners of outdoor natural sandstone, limestone, and slate surfaces. Its key benefit is providing a durable, matte finish that offers exceptional stain and water resistance while preventing efflorescence and inhibiting algae growth. A caveat is that it may alter the color of some surfaces, requiring a test in an inconspicuous area before full application.
| Colour | Green |
|---|---|
| Brand | StoneCare4U |
This sealer is specifically formulated for natural sandstone, limestone, and slate. Always test on an inconspicuous area before applying to any other stone type.
The protection is long-lasting, but the exact duration depends on environmental exposure and maintenance. Regular cleaning with pH-neutral agents will help maintain its effectiveness.
If rain is forecast or starts within 6 hours of application, stop immediately and cover the treated areas. Rain can wash away the sealer before it has cured, compromising its effectiveness.
No, the sealer provides an "essential matt finish" that enhances the natural look of the stone without adding any shine.
Reapplication frequency varies based on wear and exposure. Typically, it is recommended every 2-5 years, but monitor the surface for signs of reduced water repellency.
No, the product should not be diluted. It must be applied at its full strength to ensure proper adhesion and performance.
Always wear appropriate safety gear, including gloves, suitable protective eyewear, a face mask, and clothing, to avoid skin and eye contact and inhalation.
Ensure the sealer was applied evenly and to saturation. Reapply a second coat "wet on wet" if necessary, ensuring consistent application.
Check if the application temperature was within the recommended range (13-23°C) and if the surface was completely dry before application. Excessive moisture or low temperatures can impede drying.
Ensure the surface was completely dry and free of existing salts before sealing. The sealer helps inhibit but may not fully prevent efflorescence if there's a persistent moisture source.
A second "wet on wet" coat may be required for full saturation. The porosity of the stone greatly affects absorption; re-evaluation of application technique might be needed.
Preparation:
Application:
Compatibility:
Suitable for natural sandstone, limestone, and slate surfaces. Not recommended for treated or non-porous materials. Always test on a small, hidden area.
Care:
Clean sealed areas using a mild, pH-neutral cleaner or a highly diluted outdoor cleaner. Avoid harsh or abrasive cleaning agents, as these can damage the treated surface.
