Best current price£14.65from eBay
Shopping.co.uk recommended and popular offers
eBay£14.65Visit shop Varilight XC9W Classic Mirror Chrome 4 Gang 10A 1 or 2 Way Rocker Light Switch
Visit shop
B&Q£15.60Visit shop B&Q - 4-Gang 2-Way Rocker Light SwitchClassic Mirror Chrome With White RockersXc9W
Visit shop6 offers from £14.65 - £20.51
View price history by clicking the chart icon.
This Varilight Classic 4-gang rocker switch in Silver is designed for homeowners seeking a traditional yet functional lighting control solution. Its key benefit is the ability to manage four separate lighting circuits from a single, elegant point, suitable for mains and low voltage lighting. A potential caveat is its traditional rocker design, which may not suit ultra-modern minimalist aesthetics.
| Colour | Silver |
|---|---|
| Model Part Number | XC9W |
| Brand | Varilight |
No, this is a standard rocker switch designed for on/off control only. It does not have dimmer functionality.
The switch is rated for 10 Amps, which is suitable for most standard household lighting circuits. Always check the total wattage of your connected lights.
1-way switching means the light is controlled from a single location. 2-way switching allows the light to be controlled from two different locations (e.g., top and bottom of stairs) using two linked switches.
This switch is designed for indoor use only. Outdoor rated switches have different enclosure requirements.
You can control mains voltage lighting (e.g., incandescent, halogen, mains voltage LEDs) and compatible low voltage lighting systems.
Use a soft, dry cloth. For tougher marks, a slightly damp cloth followed by a dry cloth is recommended. Avoid harsh chemicals.
Ensure the circuit breaker for the relevant lighting circuit is switched on. Verify all wiring connections are secure and correct according to the 1 or 2-way configuration. If the issue persists, consult a qualified electrician.
Check the individual bulb or fixture connected to the non-working gang. Inspect the wiring to that specific gang for loose connections. If multiple gangs are affected, re-check the main wiring to the switch.
While this is a non-dimming switch, flickering can sometimes occur with incompatible LED drivers. Ensure you are using appropriate bulbs/drivers for a standard switch. Consult the bulb manufacturer for compatibility advice.
Setup: Installation should be performed by a qualified electrician to ensure safety and compliance with electrical regulations. The switch requires standard wiring connections for its 4 gangs and optional 2-way functionality. Ensure the power is completely isolated before attempting any wiring.
Compatibility: This switch is designed for use with standard mains voltage lighting circuits (e.g., 230-240V AC). It is also compatible with compatible low voltage lighting systems, provided the total load does not exceed the 10 Amp rating. Verify compatibility with specific LED driver types if used with low voltage LEDs, as some may require specialized dimmers (though this is a non-dimming switch).
Care: To clean the switch, disconnect the power supply and use a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, followed immediately by a dry cloth. Avoid abrasive cleaners or solvents, as they can damage the finish.
