Pipe Thread Sealant - 250Ml Tube

Anaerobic thread sealant is a liquid or semi-liquid adhesive that cures (hardens) when it is deprived of oxygen, such as when applied to metal threads and assembled into a joint.

No, 567 Pipe Sealant is specifically designed for metal threaded pipe joints and is not suitable for plastic or other non-metal materials.

Handling strength is typically achieved within 1-3 hours, and full cure (for pressure testing) is usually complete within 24-48 hours, depending on temperature, joint fit, and substrate.

The product is typically designed for application and service temperatures ranging from -50°C to +150°C (-58°F to +302°F), though specific application conditions may vary.

It creates a permanent seal. Disassembly requires significant force, often aided by localized heat to soften the cured sealant.

Apply enough sealant to cover all engaged threads and the valleys between them. Wipe off excess material that is not confined to the joint.

When stored properly in its original, sealed container in a cool, dry environment, the shelf life is typically 12-24 months.

Ensure the sealant is fully confined between metal threads and has adequate contact. Check for contamination (oil, dirt) on threads. Verify ambient temperature is within the recommended range (typically above 15°C/60°F).

The joint may not have been fully tightened or the sealant was not applied correctly/uniformly. Inspect threads for damage. Disassemble, clean, reapply sealant, and reassemble.

This is expected for permanent thread lockers. Disassembly typically requires localized heat (e.g., a heat gun) to break down the cured sealant, followed by a pipe wrench.

This can indicate the product is nearing its expiration date or has been exposed to air. Always ensure the cap is sealed tightly after use.