Car Battery - Exide - EB712

Best current price£62.30from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£62.30Visit shop Battery fits RANGE ROVER Mk3 VELAR 3.0D 2002 on Exide 096 670A 71Ah Quality New
Visit shop
Best current price£62.30from eBay
Shopping.co.uk recommended and popular offers
eBay£62.30Visit shop Battery fits RANGE ROVER Mk3 VELAR 3.0D 2002 on Exide 096 670A 71Ah Quality New
Visit shop10 offers from £62.30 - £62.44
View price history by clicking the chart icon.
This guide is for car owners looking to understand and maintain their Exide EB712 car battery. The key benefit is reliable starting power and consistent performance. However, proper care and regular checks are essential for optimal battery life. This guide will cover the features, usage, setup, and troubleshooting of your Exide EB712 car battery.
| Model Part Number | EB712 |
|---|---|
| Brand | Exide |
Use a multimeter to measure the voltage across the battery terminals. A fully charged 12V battery should read around 12.6V or higher.
CCA stands for Cold Cranking Amperes. It's a measure of the battery's ability to start an engine in cold temperatures.
Car batteries typically last 3-5 years, but this can vary based on usage, climate, and maintenance. Check the manufacturing date on your battery.
Yes, you can jump-start your car using another vehicle's battery. Connect the jumper cables in the correct order: positive to positive, negative to negative (ground point).
Take your old battery to a recycling center or auto parts store that accepts batteries for recycling. Never dispose of a battery in the trash.
The EB712 has an LB3 battery group size.
EFB stands for Enhanced Flooded Battery. It's a type of lead-acid battery designed for improved performance and durability compared to standard flooded batteries, offering increased cycle life and enhanced charge acceptance.
Check battery connections for corrosion or looseness. If the connections are clean and tight, and the battery is new, have the battery and charging system tested.
Check for parasitic drain by disconnecting the negative terminal and using a multimeter to check for current draw. If a significant current draw is present, have the electrical system inspected.
Clean the terminals with a mixture of baking soda and water, using a wire brush to remove the corrosion. Rinse thoroughly and dry before reconnecting.