DeWalt SDS-Plus Chisel Set - DT60330-QZ

This set is designed for SDS-Plus rotary hammer drills that feature a rotary stop function for chiselling.

They are specifically for SDS-Plus chucks. For best results, use with an SDS-Plus hammer drill that has a rotary stop feature.

The set is ideal for masonry products like concrete, brick, mortar, stone, and tiles.

Clean them after each use, apply a light coat of oil to prevent rust, and store them in a dry place.

The set includes chisels of sizes 20 mm x 250 mm, 40 mm x 250 mm, and one additional 250 mm chisel (specific width not detailed but implied to be standard SDS chisel size).

No, these chisels are designed specifically for masonry and concrete work and are not suitable for cutting metal.

Ensure the SDS-Plus shank is clean and free of debris. Verify you are using an SDS-Plus compatible drill and that the chuck mechanism is functioning correctly.

Confirm that your drill is set to the correct mode (chisel/hammer-only). Ensure the drill has a rotary stop feature and it is engaged. Check if the chisel tip is worn or damaged and requires sharpening or replacement.

Ensure the chisel is properly seated in the chuck. Check for any damage to the chisel shank or the drill chuck. Verify you are using the correct chisel for the material.