Best current price£28.04from B&Q
Shopping.co.uk recommended and popular offers
B&Q£28.04Visit shop B&Q - Straight Swivel Tyre Inflator Clip-On Connector 1/4" Bspf Tool Pcl6S
Visit shop1 offer from £28.04
View price history by clicking the chart icon.
The Sealey Straight Swivel Tyre Inflator Clip-On Connector (PCL6S) is an essential accessory for professional mechanics and automotive enthusiasts who frequently use tyre inflators, wall gauges, or portable pressure gauges. Its primary benefit is the 360-degree swivel motion, which eliminates hose kinking and simplifies valve access; however, users should note that it requires an existing 1/4 inch BSP(M) thread on their current inflator equipment to function.
| Model Part Number | Pcl6S |
|---|---|
| Brand | Sealey |
It is compatible if your inflator hose uses a standard 1/4 inch BSP male thread fitting.
Yes, provided the tyre uses a standard Schrader valve and your inflator is capable of handling the pressure requirements.
Yes, the clip-on design uses a secure locking mechanism that releases only when the thumb button is pressed.
It is very lightweight, with a net weight of approximately 0.035kg.
Keep the joint clean and free of abrasive particles; do not use heavy grease that might attract dust.
Ensure the connector is pushed firmly onto the valve stem and the thumb button is fully released to allow the locking mechanism to engage.
Clean any grime or dust buildup around the swivel joint; if the issue persists, check for damage to the swivel body.
Tighten the connection or re-apply PTFE tape to the 1/4 inch BSP thread to ensure an airtight seal.
Setup: To install, ensure your current tyre inflator hose has a 1/4 inch BSP(M) male thread. Unscrew your existing connector using an appropriate wrench, apply a small amount of thread sealant or PTFE tape if necessary, and screw on the PCL6S until finger-tight, then tighten slightly with a wrench.
Compatibility: This model is compatible with most standard professional and DIY tyre inflators, portable gauges, and wall-mounted air lines utilizing the industry-standard 1/4 inch BSP format.
Care: To maintain performance, keep the internal rubber seal free of dirt and debris. Avoid dropping the unit on hard concrete floors to protect the internal swivel mechanism.
