Motip Stone Chip Anti-Gravel Aerosol Spray Paint - Black 500ml

Coverage varies based on application thickness. Refer to the can for specific details, but generally, one can covers a few square meters.

It is best to remove rust before applying the product for optimal results. Use a rust converter or other rust removal products before application.

Drying times vary. Check the product label for specific drying times between coats and before handling the vehicle.

Priming is recommended, especially on bare metal, to ensure better adhesion and rust prevention. Use a compatible automotive primer.

This product is primarily designed for metal surfaces. Always test on a small, inconspicuous area first to ensure compatibility with plastic parts.

After use, turn the can upside down and spray until only propellant comes out to clean the nozzle.

Use in a well-ventilated area. Wear a respirator, gloves, and eye protection. Avoid contact with skin and eyes.

The shelf life is typically several years if stored properly. Refer to the can for the expiration date.

Clean the nozzle with a solvent or replace it. Make sure to shake the can well before use to prevent clogging.

Apply thinner coats and maintain a consistent distance from the surface. Avoid spraying too much product in one area.

Ensure the surface is properly cleaned, degreased, and sanded before application. Apply a primer if necessary.

Ensure you have the correct color for your vehicle. Test the color in an inconspicuous area before full application.