Liberon Laminate Floor Sealer - 1 Litre

One 1-litre bottle typically covers an area of 40-50m².

The sealer typically dries in approximately 30 minutes.

The sealer is designed for use on laminate and vinyl flooring. Always test in an inconspicuous area first.

Regularly sweep or vacuum the floor to remove loose dirt and debris. Clean spills immediately with a damp cloth. Avoid harsh chemicals or abrasive cleaners.

Reapplication frequency depends on foot traffic and wear. Inspect the floor periodically and reapply when the shine diminishes or the protective effect is reduced.

Wipe up spills immediately with a clean cloth to prevent them from drying and potentially causing unevenness or stickiness.

Yes, the sealer provides a non-slip finish, tested to NF P90-106 standards.

Ensure even application. Use a clean cloth or mop and avoid applying too much sealer in one area. If streaking persists, lightly buff the area with a clean, dry cloth after drying.

The floor may not be fully dry or there might be an excess of product. Allow extra drying time, or lightly buff with a clean cloth.

Ensure the floor is clean, dry, and free of any previous coatings or residue before application. If necessary, lightly abrade the surface before applying.