Best current price£79.12from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£79.12Visit shop Festo Round Cylinder 32Mm Bore 50Mm Stroke Double Acting - 196022
Visit shop11 offers from £79.12 - £137.00
View price history by clicking the chart icon.
10 offers from £47.04 - £144.62
View price history by clicking the chart icon.
This Festo DSBG-160-50-PPVA-N3 pneumatic cylinder is designed for industrial automation applications requiring robust and reliable linear motion. It's ideal for engineers and technicians integrating automated systems. Its key benefit is the precise control and durability offered by its double-acting, ISO 15552 compliant design with adjustable cushioning. A potential caveat is the need for a compressed air supply and appropriate control valves.
| Model Part Number | DSBG-160-50-PPVA-N3 |
|---|---|
| Brand | Festo |
The maximum operating pressure for this cylinder is 10 bar.
It can operate within a temperature range of -20°C to +80°C.
Use the adjustable cushioning screws located at each end of the cylinder. Turn them clockwise to increase cushioning (slow down deceleration) and counter-clockwise to decrease cushioning (speed up deceleration).
While robust, it is designed for industrial environments. Extended outdoor exposure without proper protection may affect longevity due to environmental factors. Operating temperature range must be maintained.
It means the cylinder conforms to the international standard for pneumatic actuators, ensuring dimensional compatibility with mounting accessories and other components from different manufacturers adhering to the same standard.
Yes, the cylinder will function as a standard pneumatic actuator. However, you will not have integrated position feedback capabilities without an external sensor detecting the magnetic piston.
Verify air supply pressure is adequate (up to 10 bar). Check air line connections for leaks and ensure correct port activation. Confirm control valve is functioning properly.
Adjust the pneumatic cushioning at both ends. Ensure the air supply is clean and free of moisture or contaminants. Check for any mechanical binding in the guided motion.
Ensure no obstructions along the stroke path. Check for internal leaks or issues with the control valve. Verify air pressure is sufficient.
Ensure the magnetic piston is present and functioning. Check that the external sensor is correctly positioned and compatible with the magnetic field.
Setup: Mount the cylinder using appropriate accessories compatible with the ISO 15552 standard. Ensure air lines are correctly connected to the ports for extension and retraction. Adjust the pneumatic cushioning screws at both ends to achieve the desired deceleration rate based on the operating speed and load. Fine-tuning may be required after initial operation.
Compatibility: This cylinder is compatible with standard pneumatic control valves and compressed air systems meeting industrial standards. The ISO 15552 compliance ensures compatibility with a wide array of mounting brackets, clevises, and rod end attachments. It operates with clean, dry, or lubricated compressed air within the specified pressure range.
Care: Regularly inspect air connections for leaks. Keep the cylinder exterior clean to prevent debris ingress. Periodically check and adjust cushioning settings if operating conditions change. Ensure the operating temperature remains within the specified range (-20°C to +80°C).
