Ragni 4 Piece Bricklayers Multi-Pack Accessories Kit - R402BAP

The yellow corner blocks help to anchor the brick line and maintain tension, especially when working around corners or against existing structures, providing a stable point for the line.

The brick line is 76 meters long, making it suitable for longer runs of brickwork.

The brick jointer is 1/2" x 5/8", designed for creating standard mortar joint profiles.

No, the 6” line pins are forged from a single piece of steel, ensuring rigidity and strength to resist bending during use.

Wipe the line pins with a damp cloth to remove mortar residue and dry them thoroughly. Store in a dry location to prevent rust.

This kit provides essential tools for general bricklaying. The jointer size is standard, and users may need additional specialized tools for unique brick profiles or specific finishing techniques.

Ensure line pins are set firmly and deep enough. Check that corner blocks are providing adequate tension, or consider using a separate line tensioning device if available for very long runs.

Ensure pins are inserted into solid mortar or brickwork. Try a slightly different angle or depth for insertion. For softer mortar, allow it to cure slightly longer before setting pins.

Practice consistent pressure and speed. Ensure mortar is at the correct stage of stiffness – too wet or too dry can lead to poor results. Clean the jointer regularly during use.

Wipe the pins dry after each use and store them in a dry environment. The polish chrome finish offers good resistance, but prolonged exposure to moisture can still cause surface rust.