Wessex Electrical IP66 13A RCD Switched Socket - 2 Gang
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Wessex Electrical 2-gang switched socket is designed for outdoor use, providing a safe and reliable electrical connection for garden equipment, tools, or hot tubs. Its key benefit is the IP66 weatherproof rating combined with 30mA RCD protection, offering excellent safety against water and electrical faults. A potential caveat is that while installation is designed to be straightforward, basic electrical knowledge is recommended.
All features
| Model Part Number | 5.06E+12 |
|---|---|
| Brand | Wessex Electrical |
Extended Product Information
FAQs
What does IP66 rating mean?
An IP66 rating signifies that the enclosure is 'dust tight' (6) and protected against powerful water jets from any direction (6), making it highly resistant to weather.
Is this socket safe to use in heavy rain?
Yes, the IP66 rating is specifically designed to protect against heavy rain and water ingress.
Do I need to buy cable glands separately?
Yes, suitable cable glands are required to maintain the IP rating and are typically purchased separately based on the cable size being used.
How do I test the RCD protection?
Most RCD sockets have a test button. Ensure power is supplied, then press the 'Test' button. The power should cut out. Press the 'Reset' button to restore power. If it doesn't work, consult an electrician.
Can I use this socket indoors?
While it can be used indoors, its primary design and features (IP66, RCD) are optimized for outdoor environments. For indoor use, simpler sockets might suffice.
What is the warranty period for this product?
Please refer to the product packaging or the retailer's documentation for specific warranty information, as this can vary.
Can the socket be removed without taking down the whole enclosure?
Yes, the socket module can be removed from the enclosure without needing to split the main casing, simplifying maintenance or replacement.
Troubleshooting
Socket not powering appliances
Check that the main power supply is on. Verify the RCD has not tripped; if it has, reset it. Ensure the appliance plug is fully inserted and functioning.
RCD trips immediately
This indicates a potential fault. Unplug all connected devices and test the RCD with no load. If it still trips, there may be a fault within the socket or the wiring. Consult a qualified electrician.
Water ingress detected
Immediately switch off the power supply. Inspect the enclosure seals and cable glands for damage or improper fitting. Ensure all knockouts are properly sealed. If damage is found, replace the affected part or the entire unit if necessary.
Indicator light not working
Check the power supply and RCD status. If power is present but the light is out, there may be an internal fault with the indicator LED. This does not necessarily affect socket functionality but may require professional inspection.
Pros and Cons
Pros
- Excellent weatherproofing for outdoor reliability.
- Integrated RCD offers enhanced user safety.
- Durable construction built to withstand environmental exposure.
- Flexible installation options due to multiple cable entry points.
- Clear visual indicators for power status.
Cons
- Requires basic electrical knowledge for safe installation.
- May be overkill for sheltered or indoor applications.
- Aesthetically functional rather than decorative.
Setup, Compatibility & Care
Setup:
- Isolate Power: Ensure the main power supply to the intended circuit is turned off at the breaker.
- Cable Entry: Select the appropriate knockout and install a suitable cable gland (not included) to maintain the IP rating.
- Wiring: Connect the incoming live, neutral, and earth wires to the appropriate terminals inside the socket.
- Mounting: Securely mount the socket enclosure to a solid surface using appropriate fixings.
- Testing: Restore power and test the RCD functionality before connecting any appliances.
Compatibility:
- Suitable for standard UK 13A appliances.
- Designed for 230V mains power supply.
Care:
- Regularly inspect the enclosure and seals for any signs of damage.
- Clean the exterior with a damp cloth; avoid abrasive cleaners.
- Periodically test the RCD function according to manufacturer recommendations or local regulations.