Best current price£33.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£33.99Visit shop B&Q - Replacement Stove GlassMorso Panther (2110) (235mm X 200mm Rectangular)
Visit shop1 offer from £33.99
View price history by clicking the chart icon.
The Chimsoc Replacement Stove Glass for the Morso Panther (235mm x 200mm) is designed for homeowners looking to restore the safety and aesthetic clarity of their heating appliance. Crafted from high-quality 4mm Schott Robax ceramic glass, it provides exceptional heat resistance and thermal stability for wood-burning, multi-fuel, and gas stoves; however, users must ensure the door seal remains in good condition during installation to maintain optimal draft performance.
| Model Part Number | MOR-P235200 |
|---|---|
| Brand | Chimsoc |
This specific unit is sized for the Morso Panther (235mm x 200mm). Always verify your stove's manual for specific glass dimensions before purchasing.
Standard household cleaners often leave residues that can bake onto the glass; it is highly recommended to use a designated stove glass cleaner.
Apply a penetrating oil to the screws and let it sit before attempting to loosen them to avoid stripping the threads or damaging the door frame.
The product information focuses on the glass panel itself. You should purchase a new stove rope seal separately to ensure a proper fit during installation.
Yes, 4mm is the standard thickness for Schott Robax ceramic glass, providing the optimal balance between durability and heat transmission.
Check if the screws were over-tightened. They should be tightened only by hand to allow for slight thermal expansion.
Verify that the rope seal or self-adhesive gasket is correctly seated around the perimeter of the glass.
Ensure your firewood is well-seasoned and that your airflow controls are adjusted to maintain a clean burn inside the firebox.
To install, first ensure the stove is completely cool. Remove the stove door and lay it on a flat, protected surface. Carefully clear the door frame of any old debris, rust, or remnants of the previous glass. It is essential to replace or verify that the rope or self-adhesive tape seal between the glass and the door is in good condition; a poor seal can lead to air leaks. When placing the new glass, position it gently into the frame. When securing the glass with screws and washers, tighten them gently by hand only. Do not use power tools, as over-tightening can create tension points that cause the glass to crack once the stove heats up. For ongoing care, clean the glass with a specialized soot remover once cool, and avoid abrasive scrubbers that may leave micro-scratches.
