Anaglypta Wallpaper Louisa - White - RD750

For this Anaglypta Louisa wallpaper, it is recommended to use a ready-mixed adhesive specifically designed for vinyl wallpapers. Always check the wallpaper and adhesive manufacturer's instructions.

It is best to allow the wallpaper adhesive to dry completely, typically for at least 24 hours, before painting. Ensure the surface is fully dry and stable.

The wallpaper is washable. Use a clean, damp cloth or sponge to gently wipe away marks. Avoid using abrasive cleaners or scrubbing, as this can damage the finish.

This refers to the pattern repeat. For every 32cm of wallpaper length, the pattern will align. An 'offset' match means that when hanging the next strip, you will need to shift it by half the pattern repeat (16cm) to align the design with the previous strip.

Each roll is 10m x 0.53m, covering approximately 5.32 square meters. Calculate the total square meterage of your walls and divide by 5.32. Always account for pattern matching, which may require slightly more paper. It is highly recommended to order all rolls needed for the job at once, as batch numbers cannot be guaranteed on subsequent purchases.

The Anaglypta Louisa Wallpaper RD750 comes with a 1-year guarantee.

Yes, this wallpaper is classified as 'Wet Removable', meaning it can be stripped off the wall when wet.

Ensure the adhesive is applied evenly and cover the entire paper surface. Smooth out bubbles immediately with a wallpaper brush, working from the center outwards. If a crease is significant, you may need to lift the paper and reapply.

Double-check the 32cm offset match. Ensure the pattern on the edge of the previously hung strip aligns with the corresponding point on the new strip. Adjust placement carefully. Ensure your first strip was hung perfectly vertical.

Use a sharp, fresh blade in your utility knife. Make clean, decisive cuts. A cutting edge or ruler can help achieve straight lines.

Ensure you are using a ready-mixed adhesive specifically recommended for vinyl wallpapers. Follow the manufacturer's instructions for the adhesive; some may require slight thinning or thickening.