Pattern 10 Internal Door Pair - Oak - Brown
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The XL Joinery Pattern 10 Internal Door Pair in Oak is designed for homeowners seeking to maximize natural light flow between rooms. Its key benefit is the generous glazed panels that create an open and airy atmosphere. A potential caveat is its specific oak veneer finish, which may require careful coordination with existing décor. This room divider features two large clear glazed panels set within a distinctive oak veneer, offering a flexible solution to enhance natural light transfer and aesthetic appeal. Matching standard doors are also available to ensure a cohesive interior design.
All features
| Colour | Brown |
|---|---|
| Model Part Number | GOPP1060 |
| Brand | XL Joinery |
Extended Product Information
FAQs
What material is the door made from?
The Pattern 10 Internal Door Pair features an oak veneer finish.
Can I use these doors for exterior purposes?
No, these doors are designed exclusively for internal use.
Are matching single doors available?
Yes, XL Joinery offers matching standard doors to create a harmonious look throughout your home.
How should I clean the glazed panels?
Clean the glass panels with a standard glass cleaner and a soft, lint-free cloth. Avoid spraying cleaner directly onto the frame.
What is the primary benefit of the Pattern 10 design?
The primary benefit is allowing the maximum amount of natural daylight to flow between rooms due to its two large clear glazed panels.
What are the dimensions of the glazed panels?
The product description specifies 'two large clear glazed panels' without exact dimensions, indicating their significant size relative to the door.
Troubleshooting
Door sticking or difficult to open/close
Check for obstructions, ensure hinges are properly aligned and tightened, and verify the door frame is square and not warped.
Veneer discoloration or damage
Avoid direct sunlight exposure for prolonged periods. Clean gently with a damp cloth and mild soap solution if needed, and ensure no harsh chemicals are used.
Gaps around the door frame
Ensure the frame is properly installed and sealed. Minor gaps can sometimes be addressed with appropriate draught excluders or frame fillers.
Pros and Cons
Pros
- Significantly increases natural light between rooms.
- The oak veneer provides a premium and natural look.
- Enhances the sense of space and openness.
- Offers design consistency with matching standard doors.
- Acts as a stylish room divider without fully closing off spaces.
Cons
- The clear glazed panels may offer less privacy.
- Requires careful consideration of floor preparation and hardware.
- Oak veneer may require specific care to maintain its appearance.
- The design is specific and might not suit all interior styles.
Setup, Compatibility & Care
Setup: Installation of the Pattern 10 Internal Door Pair requires standard door fitting procedures. This includes ensuring the frame is plumb and level, fitting the doors into the frame, hanging them with appropriate hinges, and installing handles and any necessary locking mechanisms. It is recommended that professional fitting is considered for optimal results and safety.
Compatibility: This door pair is designed for internal use and is compatible with most standard internal door frames. Ensure the frame dimensions are suitable for the door size. Matching standard doors are available from XL Joinery to create a cohesive look throughout the property.
Care: To maintain the appearance of the oak veneer, clean the doors with a slightly damp, soft cloth. Avoid using abrasive cleaners or excessive moisture. For tougher marks, a mild detergent solution can be used sparingly, followed by wiping with a clean, dry cloth. Protect the glazed panels from harsh impacts.