Oil Filter - MANN-FILTER - 037115561

The primary function is to remove contaminants and impurities from the engine oil, ensuring clean oil circulates to lubricate engine parts and reduce wear.

It is recommended to replace the oil filter according to your vehicle manufacturer's service schedule, typically every 5,000 to 10,000 miles, or with every oil change.

The anti-return valve prevents engine oil from draining back into the oil pan when the engine is shut off. This ensures that oil is immediately available to lubricate the engine components upon the next startup.

The filter has a Height of 136 mm, an Outer diameter of 76 mm, and a Thread Size of 3/4-16 UNF. The gasket dimensions are an Outer diameter of 71 mm and an Inner diameter of 62 mm.

You can use the vehicle make and model selection tool provided on our website or contact customer support with your vehicle's specific details (year, make, model, engine size) for assistance.

The bypass valve opens at 2.5 bar. This ensures oil can still reach the engine if the filter becomes clogged or during extremely cold conditions when oil flow is restricted.

Check that the filter gasket is properly seated and that the filter was tightened correctly by hand (not overtightened with a wrench). Ensure the engine's mounting surface is clean and free of debris.

Verify the oil level is correct. Ensure the new oil filter is fully seated and properly tightened. If the issue persists, check for other potential causes of low oil pressure.

Use a properly sized oil filter wrench. If the filter is very tight, a strap wrench or cap wrench might provide better leverage. Ensure you are turning it counter-clockwise (lefty-loosey).