StrataRise Tile Spacers - T-Shaped - Pack Of 200 Pcs. (4Mm)

One pack of 200 spacers is typically sufficient for a medium-sized area, depending on tile size and layout. For a standard 12x12 inch tile laid in a grid, 200 spacers can support approximately 25-30 tiles.

StrataRise tile spacers are designed for single use. While they may not break, reusing them can compromise the precision of spacing in subsequent applications.

T-shaped spacers provide consistent spacing from all four sides of a tile, ideal for grid layouts. L-shaped spacers are more common for linear patterns or situations where spacing on two sides is primarily needed.

The choice depends on your aesthetic preference and tile manufacturer recommendations. Common choices are 1.5 mm to 3 mm for a modern, minimal grout line, or 5 mm and up for more traditional looks or tiles with slightly uneven edges.

For very small mosaic tiles, a different type of spacer or manual spacing might be more appropriate. These T-shaped spacers are best suited for standard to large format tiles.

The pack of 200 StrataRise tile spacers weighs approximately 0.2755778275 pounds.

Ensure you are using the correct spacer width for your tiles and that the adhesive bed is not excessively thick or uneven, which can put undue pressure on the spacer.

Allow adequate curing time for the adhesive. If still stubborn, try gently tapping around the tile edge or using a thin, flat tool to carefully lever the spacer out. Avoid excessive force that could damage the tile or grout.

Verify that the tiles themselves are flat and not warped. Ensure spacers are fully inserted and that tiles are pressed evenly into the adhesive. Check that the subfloor is level.