Best current price£316.74from Demon Tweeks
Shopping.co.uk recommended and popular offers
Demon Tweeks£316.74Visit shop Wilwood Adjustable 2 Pedal 6.25 Ratio Universal Swing Mount Pedal Box - Rear Facing Master Cylinders
Visit shop2 offers from £316.74
View price history by clicking the chart icon.
This Wilwood pedal box is designed for automotive enthusiasts and builders seeking a consolidated and adjustable brake and clutch pedal solution. Its key benefit is the flexible mounting of master cylinders, allowing for either inside or outside firewall placement, while offering precise brake bias control. A potential caveat is the need for careful consideration of firewall space and master cylinder fluid access depending on installation.
| Model Part Number | 340-11299 |
|---|---|
| Brand | Wilwood |
Both the brake and clutch pedals feature a 6.25:1 pedal ratio.
Yes, while this specific model is configured for rear-facing (inside firewall) master cylinders, Wilwood offers other pedal box configurations that allow for front-facing (outside firewall) mounting.
This pedal box is designed for use with Wilwood compact, high volume, or combination master cylinders.
Brake bias is adjusted using the integrated pivot pin balance bar. It can be set and locked with a jam nut or connected to a remote cable for on-the-fly adjustments.
No, this product includes the pedal box assembly, mounting hardware, and balance bar components. Master cylinders are sold separately.
The pedal box is constructed from an all-aluminum frame and forged aluminum pedal arms with a ladder-style construction.
Yes, the pedal pads on this pedal box are specially adjustable to allow for fine-tuning of the pedal location and clearance.
Check for proper alignment of master cylinders with the pedal arms. Ensure no obstructions are present. Lubricate pivot points lightly if necessary and verify all mounting hardware is secure but not overtightened.
Ensure the balance bar adjustment mechanism moves freely. If using a remote cable, check its tension and routing. Confirm the jam nut is loosened before adjustment if not using a remote cable.
Verify that the clevis is correctly installed and secured to the pedal arm. Ensure the master cylinder pushrod is properly seated within the clevis.
Apply a small amount of appropriate lubricant to the pedal pivot bushings or bearings. Ensure no foreign debris is present at the pivot.
Setup: This pedal box requires mounting to the vehicle's chassis or firewall. Ensure adequate clearance for the pedal arms' swing and the master cylinders. The master cylinders (sold separately) attach to the rear-facing studs. The balance bar assembly allows for brake bias adjustment; it can be locked down with the included jam nut or connected to a remote cable. Both brake and clutch pedals share a 6.25:1 ratio.
Compatibility: The pedal box is designed to work with Wilwood compact, high volume, or combination master cylinders. Ensure your chosen master cylinders fit the provided mounting stud dimensions. This unit is typically used in custom automotive applications and may require custom fabrication for installation.
Care: Clean the pedal box assembly periodically with a soft, dry cloth to remove dust and debris. For stubborn grime, use a slightly damp cloth, ensuring no moisture enters the master cylinders or pivot points. Avoid using harsh solvents or abrasive cleaners that could damage the anodized finish. Regularly check the tightness of all hardware, especially the balance bar jam nut and pivot pin.
