Shopping.co.uk

Triplewax Vortex Blast Snow Foam Thick Car Shampoo Vehicle Cleaner - 1L x3

Triplewax Vortex Blast Snow Foam Thick Car Shampoo Vehicle Cleaner - 1L x3

Triplewax Vortex Blast Snow Foam coats your vehicle in a deep cleaning foam that loosens and lifts...

Best current price£27.99from eBay

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
eBay£27.99Visit shop

Triplewax Vortex Blast Snow Foam Thick Car Shampoo Vehicle Cleaner 1L x3

Visit shop

All Offers

3 offers from £27.99 - £32.99

View price history by clicking the chart icon.

eBayTriplewax Vortex Blast Snow Foam Thick Car Shampoo Vehicle Cleaner 1L x3
Free delivery in 1–3 days
£27.99
Visit shop
B&QB&Q - Vortex Blast Snow Foam Thick Car Shampoo Vehicle Cleaner 1L X3
Free delivery in 1–3 days
£31.99
Visit shop

Product Information

Full details

The Triplewax Vortex Blast Snow Foam is designed for car enthusiasts seeking a superior pre-wash or shampoo solution. Its key benefit is creating a thick, candy floss fragranced foam that effectively loosens and lifts dirt without damaging existing wax or sealant layers. A potential consideration is its requirement for a pressure washer and snow foam lance for optimal performance.

All features

Model Part NumberTSF106
BrandTriplewax

Extended Product Information

FAQs

How much product should I use?

For a 1-litre snow foam lance, use 100ml of Triplewax Vortex Blast Snow Foam and fill the remainder with water.

Can I use this product without a snow foam lance?

While it is designed for use with a pressure washer and snow foam lance for optimal results, it can be used as a high-foaming shampoo by agitating it with a wash mitt after application.

Will this product remove all dirt in one go?

It is highly effective at loosening and lifting a significant amount of dirt and grime, especially as a pre-wash. For a complete clean, a subsequent contact wash with a shampoo like Triplewax Wash & Wax is recommended.

How long should I leave the foam on the car?

Allow the foam to dwell for approximately 5 minutes. It is crucial not to let the foam dry on the vehicle's surface.

Is this product safe for ceramic coatings?

The product is designed not to strip wax or sealant layers. While generally safe for most modern paint protection, it is always advisable to test in an inconspicuous area if you have concerns about specific coatings.

What is the benefit of using a snow foam pre-wash?

Using snow foam as a pre-wash helps to loosen and lift the larger, abrasive particles of dirt and grime from the surface. This significantly reduces the risk of inflicting swirl marks and scratches during the subsequent contact wash stage, allowing your main shampoo to work more effectively.

Can I use this in cold weather?

While it can be used in cooler weather, avoid letting the foam freeze. Ensure the vehicle is not in direct sunlight or on a hot surface to prevent premature drying, which is more likely in warmer conditions.

Troubleshooting

Foam is not thick or clinging well.

Ensure the bottle has been shaken well. Check that the correct dilution ratio (100ml per litre) is being used in the snow foam lance. Verify the pressure washer and lance are functioning correctly.

Foam is drying too quickly on the vehicle.

Work in smaller sections or in cooler conditions. Reduce the dwell time if necessary, but aim for the recommended 5 minutes. Ensure the vehicle is not in direct, hot sunlight during application.

Product seems to be stripping wax.

While designed to be wax-safe, extremely delicate or old waxes may be affected. Perform a spot test in an inconspicuous area if concerned. Ensure proper rinsing.

Snow foam lance is blocked.

Disassemble the lance according to its manufacturer's instructions and clean any blockages, particularly the mesh filter and nozzle.

Pros and Cons

Pros

  • Effectively loosens and lifts dirt and grime.
  • Does not strip wax or sealant layers.
  • Pleasant candy floss fragrance.
  • Can be used as a pre-wash or shampoo.
  • Reduces the risk of swirl marks during washing.

Cons

  • Requires a pressure washer and snow foam lance for best results.
  • Foam should not be allowed to dry on the vehicle surface.
  • May require a separate contact wash for complete cleaning.

Setup, Compatibility & Care

Setup:

  1. Shake the bottle well before use.
  2. Use your pressure washer to rinse the vehicle thoroughly from top to bottom.
  3. Pour 100ml of Triplewax Vortex Blast Snow Foam into a 1-litre snow foam lance.
  4. Fill the remainder of the lance with water.
  5. Attach the lance to your pressure washer.

Usage as Pre-Wash:

  1. Spray the foam onto the vehicle's surface, working from the bottom up.
  2. Allow the foam to dwell for approximately 5 minutes. Crucially, do not let the foam dry on the surface.
  3. Rinse the vehicle thoroughly with the pressure washer, working from the top down.

Usage as High Foam Shampoo:

  1. After applying and dwelling as per pre-wash instructions, agitate the foam on the surface using a sponge, cloth, or wash mitt.
  2. Rinse the vehicle with the pressure washer, working from top to bottom.

Compatibility:

  • Developed for use with pressure washers and snow foam lances.
  • Suitable for use before applying other shampoos, such as Triplewax Wash & Wax.
  • Recommended for use before applying a protective wax, such as Triplewax Carnauba Wax, for an enhanced shine.

Care:

  • Store the bottle in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Ensure the cap is securely closed after use.
  • Clean the snow foam lance regularly to prevent blockages.

Price History

DatePrice
Visit shop