D-C-Fix Woodgrain Nordic Elm Light Grey Self Adhesive Vinyl Wrap Film - 5M(L) 90Cm(W)

Dc fix sticky back plastic designs are so authentic, you will hardly believe it’s a vinyl film. Re...

Best current price£33.97from B&Q

All Offers

3 offers from £33.97 - £35.49

View price history by clicking the chart icon.

B&QB&Q - Nordic Elm Light Grey 90Cm X 5M Self-Adhesive Vinyl Wrap For Doors And Worktops
Free delivery in 1–3 days
£33.97
Visit shop
Robert Dyasd-c-fix Nordic Elm Light Grey Self-adhesive Vinyl Wrap 90cm x 5m
£2.95 delivery
£33.99
Visit shop
DebenhamsD-C-Fix Unisex Pale Grey Nordic Elm Light Grey Self Adhesive Vinyl Wrap Film In | Size: 900Mm X 5000Mm
Free delivery in 1–3 days
£35.49
Visit shop

Product Information

Full details

This D-C-Fix self-adhesive vinyl wrap film is ideal for DIY enthusiasts, renters, and homeowners looking to quickly and affordably update surfaces like countertops, kitchen doors, furniture, and wardrobes. Its key benefit is the ability to transform spaces without the cost and effort of replacement, offering an authentic woodgrain look. A key consideration is that while it's designed for non-permanent application, careful removal is needed to avoid residue.

All features

Model Part Number5056525329558
Brandd-c-fix

Extended Product Information

FAQs

Can this vinyl be applied over existing wallpaper?

It is best applied to smooth, painted surfaces. Applying over textured wallpaper may result in an uneven finish and compromised adhesion. For best results, wallpaper should be removed.

Is the adhesive permanent?

No, the adhesive is designed to be non-permanent and allows for repositioning during application. It can be removed, though careful technique is advised to minimize residue.

How long does the vinyl last?

The vinyl has a 5-star rating for durability and lightfastness, suggesting it is long-lasting when applied correctly to suitable surfaces and cared for properly.

Can I use this on a countertop that gets wet?

While it has good durability, it's recommended to seal the edges properly if used on a countertop, especially around sinks or cooking areas, to prevent moisture from seeping underneath and compromising adhesion.

What is the best way to clean the applied vinyl?

Clean gently with a soft, damp cloth using a mild detergent or soapy water. Avoid abrasive materials or harsh chemicals.

Can I reposition the vinyl if I make a mistake?

Yes, the water-based low-tack adhesive allows you to lift and reposition the vinyl during application if needed. Just peel it back carefully and reapply.

What are the dimensions of this vinyl wrap?

This specific product is 5 meters (L) by 90 centimeters (W).

Troubleshooting

Bubbles or wrinkles appear during application

Gently lift the affected area of the vinyl and re-apply, smoothing it out from the center with a squeegee or cloth. For stubborn bubbles, a pinhole can release trapped air.

Vinyl is not sticking well

Ensure the surface is thoroughly clean, dry, and smooth. Reheat the adhesive slightly with a hairdryer on a low setting and press firmly.

Difficulty cutting or trimming edges cleanly

Use a sharp craft knife or utility blade and a straight edge ruler for precise cuts. Replace the blade frequently for optimal sharpness.

Residue left after removal

Gently warm the remaining residue with a hairdryer and then try to peel it off. If necessary, use a mild adhesive remover or warm, soapy water and a soft cloth to clean the surface.

Pros and Cons

Pros

  • Provides a high-quality, authentic woodgrain aesthetic.
  • Repositionable adhesive simplifies the application process.
  • Significantly reduces renovation costs compared to full replacements.
  • Suitable for temporary home improvements and rental properties.
  • Durable and resistant to fading, shrinkage, and wear.

Cons

  • Requires careful removal to prevent residue, especially on delicate surfaces.
  • Application on textured or uneven surfaces may be challenging.
  • Over time, removal might require specific cleaning agents for stubborn adhesive.
  • Not suitable for high-moisture areas without proper sealing or application techniques.
  • Requires patience and precision for a seamless, bubble-free finish.

Setup, Compatibility & Care

Setup:

  1. Ensure the surface to be covered is clean, dry, and smooth. Remove any dust, grease, or old adhesive.
  2. Measure and cut the vinyl film to the desired size, leaving a small overlap for trimming.
  3. Peel back a small section of the backing paper from one edge.
  4. Carefully align the edge of the vinyl with the edge of the surface and press down gently.
  5. Slowly peel off the backing paper while smoothing the vinyl onto the surface with a squeegee or a soft cloth, working from the center outwards to avoid air bubbles.
  6. Trim any excess vinyl with a sharp craft knife.

Compatibility:

  • Best suited for smooth, non-porous surfaces such as sealed wood, laminate, glass, metal, and painted walls.
  • Not recommended for rough, textured, or unsealed surfaces, as adhesion may be compromised.
  • Avoid using in areas with extreme temperature fluctuations or constant high moisture, unless properly sealed around the edges.

Care:

  • Clean using a soft, damp cloth with mild soapy water.
  • Avoid abrasive cleaners or scouring pads, which can damage the finish.
  • Wipe up spills promptly.
  • For removal, gently warm the vinyl with a hairdryer on a low setting before peeling slowly.

Price History

DatePrice
Visit shop