Bartoline All Purpose Ready Mixed Filler - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Bartoline 1876 Ready To Use All Purpose Filler is designed for professionals and DIY enthusiasts seeking a high-quality, convenient solution for various repair tasks. Its key benefit is a slump-resistant, ready-to-use formulation that simplifies filling holes and cracks in plaster, plasterboard, brick, wood, and stone. A minor caveat is the 10mm maximum depth per layer, requiring multiple applications for deeper fills.
All features
| Colour | White |
|---|---|
| Model Part Number | 1876 |
| Brand | Bartoline |
Extended Product Information
FAQs
Can I use this filler on damp surfaces?
No, ensure surfaces are clean, dry, and dust-free before application for optimal adhesion and performance.
What is the maximum depth I can fill in one go?
The maximum depth for a single application is 10mm. For deeper fills, apply in multiple layers, allowing each layer to set.
Can I drill into the filler after it has set?
Yes, the filler is capable of taking wall plugs, nails, and screws when fully set.
Is this filler suitable for exterior wood repairs?
Yes, it is suitable for exterior use, but the filled area should be protected from rain and moisture until set, and ideally overcoated with a suitable exterior paint or varnish for durability.
How long does it take to dry?
Drying time can vary depending on depth and environmental conditions. Allow sufficient time for it to set completely before sanding or painting.
Does the filler need to be painted over?
While it dries white and can be left as is for some interior applications, it is recommended to overcoat with paint for a better finish and for exterior protection against weathering.
Can I use this filler on metal surfaces?
The product description specifies plaster, plasterboard, brick, wood, and stone. It is not explicitly stated for use on metal.
Troubleshooting
Filler is too stiff or difficult to spread.
Stir the filler gently to achieve an even, smooth consistency. If it's still too stiff, it may be old; consider replacing it.
Filler has cracked after drying.
This can happen if applied too thickly. Remove the cracked filler and reapply in layers no thicker than 10mm, allowing each layer to set.
Filler is shrinking significantly as it dries.
Ensure the surface is properly prepared (clean, dry, dust-free). Apply in thinner layers (max 10mm) and build up if necessary.
Painted surface over the filler is flashing or grinning.
This filler is designed not to flash or grin. Ensure the filler is fully dry and sanded smooth before painting. Check that the paint is applied evenly.
Pros and Cons
Pros
- Convenient ready-mixed formula saves preparation time.
- Excellent adhesion to a variety of building materials.
- Slump-resistant quality ensures neat application on walls and ceilings.
- Easy to sand, facilitating a smooth finish for painting.
- Can accept fixings (wall plugs, nails, screws) after setting.
- Suitable for both indoor and outdoor repairs.
Cons
- Maximum depth of 10mm per layer; deeper fills require multiple applications.
- Requires protection from rain and moisture until fully set when used outdoors.
- Needs overcoating with suitable paint or varnish for long-term exterior durability.
Setup, Compatibility & Care
Preparation:
Ensure the surface to be filled is clean, dry, and free from dust. For hairline cracks, slightly enlarge them to allow better filler penetration. If filling areas with nail or screw heads, it's recommended to touch them with an oil-based paint to prevent rust from bleeding through the filler later.
Application:
Stir the filler gently if needed to achieve an even, smooth consistency. Apply manually using a filling knife or trowel, pressing firmly into the area to be filled. Do not apply more than 10mm depth in a single layer; for deeper areas, apply in multiple layers, allowing each to set before adding the next.
Finishing:
Fill the area slightly proud of the surrounding surface. Once the filler is completely set, sand it down to a fine, smooth finish that is flush with the surface.
Outdoor Use:
When used outdoors, protect the filled area from rain and moisture until it has fully set. For best long-term results, protect the cured filler from excessive weathering by applying a suitable exterior paint or varnish.
Care:
Keep the container tightly closed when not in use. Store in a cool, dry place.