Diall Hollow Wall Anchor Kit

These anchors are suitable for use in plasterboard, hollow brick, and similar cavity wall materials.

Select an anchor size based on the weight of the item you are mounting and the thickness of the wall material. The kit usually includes different sizes.

You will need a drill, drill bits of appropriate sizes, the setting tool included in the kit, and a screwdriver or drill with a screw bit.

The anchors are suitable for a range of weights. However, always check the weight capacity of the anchor and the wall. For extremely heavy items, consider additional support or professional installation.

Remove the anchor and try again with a new one, ensuring the hole size is correct. Check the wall material for any obstructions.

It is generally not recommended to reuse hollow wall anchors as they may lose their holding strength after initial use.

If you need to remove an anchor, you can try to unscrew it. If that doesn't work, you can push it into the wall or use a tool to extract it, then fill the hole.

Ensure the drilled hole is not too large. If necessary, use a slightly larger anchor or fill the hole with a suitable filler before re-drilling.

Check that the anchor is fully expanded behind the wall. Ensure the correct anchor size was used for the weight of the item. Tighten the screw appropriately.