Lubrex Engine Oil - 5w40
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Lubrex 5w40 engine oil is for modern passenger cars needing advanced synthetic protection, offering superior wear defense and fuel economy. A potential caveat is ensuring your vehicle's specific requirements align with its "Mid SAPS" classification. It features fully synthetic formulation for excellent engine protection, improved oxidation resistance, deposit control, and exceptional low-temperature performance.
All features
| Brand | Lubrex |
|---|
Extended Product Information
FAQs
What does "Mid SAPS" mean for my car?
"Mid SAPS" refers to the oil's low levels of Sulphated Ash, Phosphorus, and Sulphur. This is important for modern vehicles with exhaust after-treatment systems like diesel particulate filters (DPFs) or gasoline particulate filters (GPFs), as it helps prevent clogging and extends their lifespan.
Is this oil suitable for older diesel engines?
This oil is specifically designed for "Mid SAPS" requirements, which is crucial for modern emission systems. While it may be technically compatible, older diesel engines without particulate filters might not benefit from this specific formulation, and a conventional or high-SAPS oil might be recommended by the manufacturer.
How often should I change this Lubrex 5w40 oil?
The change interval depends on your vehicle manufacturer's recommendations. Consult your car's owner's manual for the specific mileage or time-based service schedule for oil changes.
Can I mix this synthetic oil with conventional oil?
While it is generally not recommended to mix synthetic and conventional oils, in a pinch, a small amount of mixing should not cause significant harm. However, it can dilute the performance benefits of the synthetic oil. For optimal performance, always use the recommended type and avoid mixing.
What is the difference between 5w40 and other viscosities like 0w20?
The '5w' indicates the oil's viscosity at cold temperatures (lower number is better for cold starts), and '40' indicates its viscosity at operating temperature. Different vehicles are designed for specific viscosity grades; always use the one specified in your owner's manual.
Does this oil provide protection against sludge?
Yes, the Lubrex 5w40 Velocity Nano MS oil contains a special cleaning additive designed to help prevent the formation of sludge and harmful deposits, keeping the engine interior clean.
Troubleshooting
Engine oil level drops quickly
Check for oil leaks around the engine and oil filter. Also, inspect for excessive oil consumption which may require engine diagnostics.
Oil warning light stays on after starting
Ensure the correct oil viscosity and type were used. Verify the oil filter is correctly installed. If the light persists, consult a mechanic immediately to check oil pressure.
Engine runs hotter than usual
While the oil has thermal control properties, persistent overheating could indicate a cooling system issue. Ensure the oil change was performed correctly and the oil level is adequate.
Difficulty starting in cold weather
Confirm that the oil is rated for low-temperature performance and meets the vehicle's specifications. If using the correct oil, extreme weather conditions may still pose challenges, but this oil is designed to mitigate them.
Pros and Cons
Pros
- Exceptional wear protection for engine longevity.
- Keeps engine components clean by preventing sludge and deposits.
- Supports fuel economy improvements.
- Ensures reliable cold starts.
- Compatible with modern emission control systems (catalytic converters).
- Resistant to high thermal loads.
Cons
- Requires verification for "Mid SAPS" compatibility with older vehicles.
- Synthetic oils can be more costly than conventional alternatives.
- Not suitable for engines that specifically require non-synthetic or different SAPS levels.
- Specialized formulation means it's not a one-size-fits-all oil for every engine type.
Setup, Compatibility & Care
Setup:
This oil is designed for direct replacement in engines requiring a 5w40 viscosity grade and meeting the specified OEM and industry standards. Ensure the engine is at normal operating temperature before draining the old oil and filter. Fill with the correct amount of new oil as per your vehicle manufacturer's manual. Dispose of used oil responsibly.
Compatibility:
This oil meets the following specifications: ACEA C3, MB 229.52, MB 226.5, BMW LL-04, Renault RN0700 / 0710, Dexos 2, Porsche C40, Ford 917A, AVW 505 00 / 505 01. Always consult your vehicle's owner's manual to confirm it requires a 5w40 oil with these or equivalent approvals, especially confirming the "Mid SAPS" (low ash) requirement.
Care:
Engine oil should be changed according to your vehicle manufacturer's recommended service interval. Regularly check the oil level using the dipstick and top up if necessary between changes. Inspect the oil for color and consistency; excessively dark or gritty oil may indicate a need for earlier replacement.