Shopping.co.uk

Worm Drive Hose Clamp 12mm Band - 40mm 60mm

Worm Drive Hose Clamp 12mm Band - 40mm 60mm

This high-quality worm drive hose clamp features a 12mm wide band designed for hose diameters rang...

Best current price£7.74from B&Q

Best offers

Shopping.co.uk recommended and popular offers

All Offers

9 offers from £7.74 - £8.75

View price history by clicking the chart icon.

B&Q - 1X Premium A4 Stainless Steel Worm Drive Hose Clamp 12mm Band 20mm 32mm
Free delivery in 1–3 days
£7.74
Visit shop

Product Information

Full details

Designed for professionals and DIY enthusiasts who require a secure, reliable seal for hoses between 40mm and 60mm in diameter, this Clothing Estates worm drive hose clamp offers exceptional durability and pressure distribution. It is an ideal solution for industrial, marine, and outdoor plumbing applications that demand high-torque performance. However, users should verify that the hose diameter falls strictly within the 40-60mm range to ensure the worm drive mechanism can achieve a proper, airtight seal without over-tightening.

All features

Model Part NumberA44060-001
BrandClothing Estates

Extended Product Information

FAQs

Can this clamp be used on silicone hoses?

Yes, the smooth inner surface is designed to minimize damage to softer materials like silicone, though you should avoid over-tightening.

What tools are required to install this?

A standard flathead or Phillips screwdriver is sufficient to adjust the worm drive mechanism.

Is this clamp rust-resistant?

It is built for demanding marine and industrial use, but regular cleaning is recommended if exposed to saltwater environments.

What is the band width?

The band width is 12mm, which helps distribute clamping pressure more effectively than narrower bands.

Can I reuse this clamp?

Yes, the worm drive design allows for loosening and re-tightening, provided the threads and band remain undamaged.

What should I do if the clamp is too big?

If the clamp exceeds 60mm when fully tightened, it is too large for your application and you should use a smaller size, such as the 32-50mm model.

Troubleshooting

Clamp will not tighten or slips

Ensure the band is properly aligned with the worm gear and verify that the hose diameter is within the 40-60mm specification.

Screw is difficult to turn

Check the worm gear for dirt or debris and apply a small amount of lubricant if necessary.

Leakage persists after tightening

Check the hose for cracks or uneven seating on the connector; ensure the clamp is positioned squarely over the connector barb.

Pros and Cons

Pros

  • Wide band design minimizes damage to hose material
  • Easy adjustment with standard flathead or Phillips screwdriver
  • Suitable for high-torque industrial and marine environments
  • Provides a consistent, airtight seal

Cons

  • Not suitable for hoses outside the 40mm-60mm range
  • Requires manual tool usage for tightening
  • May require periodic inspection in extreme vibration settings

Setup, Compatibility & Care

To install the clamp, first ensure the hose is fully seated on the connector. Slide the open clamp over the hose before making the final connection. Once positioned, use a standard screwdriver to rotate the screw mechanism. Do not over-tighten, as this can strip the worm gear or damage the hose material; tighten only until the hose is firm and there is no movement or air leakage.

Compatibility: This specific model is strictly for hose outside diameters measuring 40mm to 60mm. Always measure your hose diameter with a caliper before installation to ensure the clamp is within its effective range.

Care: In corrosive or saline environments, rinse the clamp periodically with fresh water to remove salt deposits. Inspect the screw housing every six months to ensure it remains free of debris and continues to operate smoothly.

Price History

DatePrice
Visit shop