Autotek - Seat Monsoon Grey - 300ml
Best current price£12.99from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£12.99Visit shop Autotek Seat Monsoon Grey Fast Drying Aerosol Spray Paint 300ml
Visit shopeBay£12.99Visit shop All Offers
4 offers from £12.99 - £13.99
View price history by clicking the chart icon.
eBayAutotek Seat Monsoon Grey Fast Drying Aerosol Spray Paint 300ml
Free delivery in 1–3 days
£12.99
Visit shop
Autotek Seat Monsoon Grey Fast Drying Aerosol Spray Paint 300mlFree delivery in 1–3 days£13.99Visit shop →
My Motor WorldAutotek Grey Seat Monsoon Spray Paint 300Ml
Free delivery in 1–3 days
£12.99
Visit shop
Autotek Grey Seat Monsoon Spray Paint 300MlFree delivery in 1–3 days£12.99Visit shop →
Product Information
Full details
This Autotek Seat Monsoon Grey aerosol spray paint is ideal for DIY enthusiasts and car owners needing to touch up or repaint specific automotive parts. Its key benefit is an exact colour match for Seat models, providing a professional, durable finish with fast drying times. A caveat is the requirement for optimal conditions and preparation for best results.
All features
| Colour | Grey |
|---|---|
| Model Part Number | ATOMC337300 |
| Brand | Autotek |
| Container Volume | 300ml |
Extended Product Information
FAQs
What Seat models is this paint compatible with?
This paint is compatible with Seat Altea, Altea XL, Exeo, Ibiza, and Leon models manufactured between 2012 and 2018.
What preparation is needed before painting?
The surface must be clean, dry, and free from dirt, rust, wax, and oil. Masking is recommended, and applying at least two coats of Autotek Grey Primer is advised for best results.
How long does the paint take to dry?
The paint should be touch dry in 10-20 minutes. Full curing takes approximately 24 hours.
Can I use this paint on plastic parts?
Yes, this paint is suitable for application on rigid plastic surfaces, as well as metal and glass fibre.
What is the recommended spraying distance?
Spray from a distance of 15-25cm away from the surface to be treated.
What are the ideal conditions for application?
The ideal temperature range is between 15°C and 25°C. The application should be done outdoors or in a well-ventilated area.
How do I prevent the nozzle from clogging?
After each use, turn the aerosol upside down and spray for 2-5 seconds to clear the nozzle.
Troubleshooting
Paint is not spraying evenly or is sputtering.
Ensure the aerosol can is shaken thoroughly for at least two minutes. Check that the nozzle is not blocked; if necessary, clear it by spraying upside down after use or gently cleaning the nozzle tip.
Poor adhesion or peeling paint.
The surface may not have been properly prepared. Ensure it was clean, dry, and free from contaminants. Reapply using proper preparation steps, including priming.
Runs or drips on the painted surface.
The paint was likely applied too thickly or from too close a distance. Apply in several thin coats, maintaining the recommended spraying distance of 15-25cm, and allow adequate drying time between coats.
Colour does not match the original paint.
While designed for an exact match, slight variations can occur due to age, fading, or previous paint repairs. Ensure the correct paint code (X7R, LX7R) was selected for the vehicle model and year.
Pros and Cons
Pros
- Provides an exact colour match for specific Seat models.
- Fast-drying formula saves time during application.
- Offers protective properties for various surfaces.
- Achieves a high-quality, professional-looking finish.
- Compatible with a wide range of automotive paint types.
Cons
- Requires thorough surface preparation for optimal adhesion.
- Best application results depend on specific temperature conditions (15°C-25°C).
- Application must be done in a well-ventilated or outdoor area.
- Multiple thin coats are recommended, increasing application time.
- Requires a primer for best adhesion and finish.
Setup, Compatibility & Care
Preparation:
- Ensure the target surface is clean, free from dirt, rust, wax, and oil.
- Mask off surrounding areas to prevent overspray.
- For optimal adhesion and finish, apply at least two coats of Autotek Grey Primer (sold separately).
Application:
- Shake the aerosol can vigorously for approximately two minutes before use.
- Hold the can 15-25cm away from the surface.
- Apply thin, even coats, allowing 10-20 minutes drying time between each application.
- After use, turn the can upside down and spray for 2-5 seconds to clear the nozzle and prevent blockages.
- The paint will be touch dry in 10-20 minutes and fully cured in 24 hours.
Conditions:
- Use only outdoors or in a well-ventilated area.
- Ideal application temperatures are between 15°C and 25°C.
Compatibility:
- Compatible with Seat Altea, Altea XL, Exeo, Ibiza, and Leon models from 2012-2018.
- Suitable for metal, glass fibre, and rigid plastic surfaces.
- Compatible with nearly all automotive paint finishes and cellulose finishes.
Care:
- Store in a cool, dry place away from direct sunlight and heat sources.
- Keep out of reach of children.