Lexmark X340H22G Original Photoconductor Kit - Black

A photoconductor (or OPC drum) is a crucial component in laser printers that transfers the image from the toner to the paper. It is a light-sensitive drum that is charged and then exposed to a laser beam, creating an electrostatic image that attracts toner.

Your Lexmark printer will typically display a message or error code indicating that the photoconductor kit needs to be replaced. You may also notice a degradation in print quality, such as lines, spots, or overall fading.

No, the Lexmark X340H22G is specifically designed for the Lexmark X340 and X342 MFP models. Always check your printer's specifications for the correct part number.

The Lexmark X340H22G Photoconductor Kit has an estimated page yield of up to 30,000 pages, based on approximately 5% coverage per page.

No, this is a photoconductor kit only. Toner is a separate consumable and must be purchased independently for your printer.

The photoconductor kit has an archival storage life of approximately 2 years when stored in its original, unopened packaging in a cool, dry environment.

Lexmark's Cartridge Recollection program allows customers to return used Lexmark imaging supplies for recycling. Check Lexmark's official website for details on how to participate.

Ensure the photoconductor kit was installed correctly and the protective seals were removed. Check if the drum surface is clean. If issues persist after installation, the kit may need replacement.

Verify that the new photoconductor kit is the correct model for your printer. Ensure it is seated correctly. Sometimes, a printer reset may be required; consult your printer's manual.

Power off the printer and check that the photoconductor kit is properly seated. If the noise continues, contact Lexmark support as there might be an internal issue.