Best current price£157.57from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£157.57Visit shop Sam Mouldings White Double Tongue Andamp; Groove Mdf Cladding - 244Mm X 4.88Mtr
Visit shop2 offers from £157.57
View price history by clicking the chart icon.
The SAM Mouldings Double Tongue and Groove and V Cladding is an ideal solution for DIY enthusiasts and professionals seeking a low-maintenance, aesthetically pleasing finish for interior or protected exterior spaces. It offers a consistent, pre-finished white surface that eliminates the need for painting, though users should note that the MDF core requires careful handling to prevent moisture ingress at cut edges.
| Model Part Number | SAM004-064186 |
|---|---|
| Brand | SAM Mouldings |
No, this is an MDF-based product and should not be used in high-humidity areas like bathrooms or areas with direct water contact.
Yes, if you wish to change the color, you can lightly sand the surface and apply a suitable primer followed by your chosen topcoat.
You will need a saw for cutting to length, a measuring tape, a spirit level, and either a nail gun or high-strength construction adhesive.
The boards are provided in a standard 4.88m length. Please measure your project space carefully before ordering to minimize waste.
This product is designed for interior use or protected, dry exterior areas. It is not rated for direct outdoor exposure to rain.
Check the tongue for debris or paint buildup and ensure the groove is clear of obstructions.
Ensure the boards are fully pushed together and the substrate is perfectly plumb; use a tapping block to gently secure the joint.
This indicates moisture exposure. Ensure cut ends are properly sealed and check for leaks in the underlying wall or ceiling structure.
For optimal installation, ensure the mounting surface is flat and dry. The boards can be fixed using nails, staples, or appropriate adhesive depending on the substrate. Always acclimatize the boards in the room for at least 48 hours prior to installation to allow for thermal expansion. Because this product is made from MDF, it is critical that any cut edges are sealed with a high-quality sealant or wood primer to prevent moisture absorption. Clean the surface periodically using a soft, dry cloth; avoid using harsh chemical cleaners or abrasive sponges that could damage the white finish.
