Heat Shrink Tubing - ABB - 11.5m x 3.2mm
Best current price£15.40from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£15.40Visit shop B&Q - Generic Heat Shrink 3.2mmBlack ( Box Is 11.5 Metres)Price Is Per Box
Visit shopB&Q£15.40Visit shop One Offer
1 offer from £15.40
View price history by clicking the chart icon.
B&QB&Q - Generic Heat Shrink 3.2mmBlack ( Box Is 11.5 Metres)Price Is Per Box
Free delivery in 1–3 days
£15.40
Visit shop
Product Information
Full details
This guide is for anyone using ABB 7TCA017300R0316 heat shrink tubing, offering a reliable solution for insulation and protection in electrical applications. The key benefit is its ability to create a secure, environmentally sealed connection. However, proper application, including the use of a heat gun, is crucial for optimal performance.
All features
| Model Part Number | 7TCA017300R0316 |
|---|---|
| Brand | ABB |
Extended Product Information
FAQs
What kind of heat gun should I use?
A heat gun with adjustable temperature settings is recommended for precise application. Ensure the heat gun has a nozzle suitable for the tubing's diameter.
Can I use a lighter or match instead of a heat gun?
While a lighter or match *can* be used, it's difficult to control the heat evenly. A heat gun is highly recommended for best results.
What's the shrink ratio of this tubing?
The shrink ratio is 2:1, meaning the tubing shrinks to half its original diameter.
What temperature range can this tubing withstand?
It can operate in temperatures ranging from -55°C to 125°C.
Is the tubing resistant to chemicals?
Yes, the Polyolefin material provides resistance to many common chemicals.
Is this tubing suitable for outdoor use?
Yes, its wide temperature range and protective qualities make it suitable for outdoor applications.
What is the material of the tubing?
The material is Polyolefin (PO-X).
What is the length of the tubing?
The tubing is 11.5 meters in length.
Troubleshooting
Tubing is not shrinking evenly.
Ensure even heat distribution by rotating the tubing during heating. Adjust the heat gun's distance and angle.
Tubing is too loose after shrinking.
Verify that the correct size of tubing was used. Ensure the tubing is centered correctly before applying heat.
Tubing is burning or melting.
Reduce the heat gun's temperature or increase the distance from the tubing. Avoid prolonged heating in one spot.
Tubing is not shrinking completely.
Ensure the heat gun is providing sufficient heat. Check the heat gun's settings and apply heat for a longer duration while rotating the tubing.
Pros and Cons
Pros
- Provides excellent insulation and protection against environmental factors.
- Easy to apply with a heat gun, creating a secure seal.
- Wide operating temperature range ensures reliability in various conditions.
- Shrink ratio allows for use with different wire sizes.
- Durable Polyolefin material resists abrasion and chemicals.
Cons
- Requires a heat gun or heat source for application, adding a step to the process.
- The tubing can be damaged if the heat source is applied unevenly or for too long.
- Requires careful measurement and cutting to ensure a proper fit.
- Not reusable after shrinking.
- Limited in size range due to the fixed pre-shrink diameter.
Setup, Compatibility & Care
- Preparation:
- Cut the heat shrink tubing to a length slightly longer than the area to be covered.
- Ensure the wires or components are clean and free of debris.
- Application:
- Slide the tubing over the connection or component.
- Center the tubing over the area to be protected.
- Use a heat gun, set to a moderate temperature, to apply heat evenly around the tubing, starting from the center and working towards the ends. Rotate the tubing as you heat it.
- Avoid overheating, which can damage the tubing or the components underneath.
- Compatibility:
- Compatible with most wire and cable types.
- Ensure the tubing's diameter is suitable for the components being covered.
- Care:
- Store in a cool, dry place.
- Avoid exposure to direct sunlight or extreme temperatures.
- Handle with care to prevent damage before application.