EVG Tap Connectors - M12 X 1/2 Bsp 300Mm Flexible Tap Connectors
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for DIY enthusiasts and professional plumbers working with kitchen and bathroom mixer taps. The EVG Tap Connectors offer a durable and flexible solution for connecting monobloc mixer taps, ensuring a reliable and hassle-free installation. While versatile, ensure your existing tap has M12 x 1/2 BSP connections for compatibility.
All features
| Brand | EVG |
|---|
Extended Product Information
FAQs
What is the primary benefit of these tap connectors?
The primary benefit is their durable stainless steel construction combined with a flexible design, making installation easier, especially in confined spaces, while ensuring longevity.
Are these connectors suitable for all types of taps?
They are designed for monobloc mixer taps with M12 x 1/2 BSP connections. Compatibility with other tap types is not guaranteed.
How long are the tap connectors?
The tap connectors are 300mm (approximately 12 inches) in length.
Can I use these connectors for hot and cold water?
Yes, these connectors are suitable for both hot and cold water supply lines.
What is the thread size for the tap end?
The tap end has an M12 male thread.
What is the thread size for the valve end?
The valve end has a 1/2 BSP female thread.
How should I clean the connectors?
Clean the exterior with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaning materials.
What should I do if I am not satisfied with the product?
Xcel Home prioritizes customer satisfaction. Please contact their customer support for assistance if you are not fully satisfied with your purchase.
Troubleshooting
Leaking connection
Ensure the connection is tightened appropriately. Check that the rubber washer is present and correctly seated on the 1/2 BSP end. If the leak persists, the connector may need replacement.
Connector kinked or damaged
Do not use connectors that show signs of kinking or damage, as this can restrict water flow or lead to failure. Replace the damaged connector.
Difficulty connecting to tap/valve
Confirm that the tap and valve have the correct M12 x 1/2 BSP fittings. Ensure there are no obstructions or cross-threading.
Pros and Cons
Pros
- Durable and long-lasting stainless steel material
- Flexible design simplifies installation in tight spots
- Universal compatibility with most monobloc mixer taps
- Easy to install for both DIY and professional users
- Resilient construction ensures consistent water flow
Cons
- Specific M12 x 1/2 BSP connection size may not fit all taps
- 300mm length might be too long or short for some specific installations
- Requires basic plumbing knowledge for proper installation
- Not suitable for high-pressure systems without professional assessment
Setup, Compatibility & Care
Setup: Ensure the water supply is turned off before starting installation. Connect the M12 male end to the tap and the 1/2 BSP female end to your water supply valve. Hand-tighten first, then use a wrench for a final quarter-turn, being careful not to overtighten.
Compatibility: These connectors are specifically designed for monobloc mixer taps with M12 x 1/2 BSP fittings. Always verify your tap's connection size before purchase.
Care: Clean the exterior with a damp cloth as needed. Avoid using abrasive cleaners. Regularly check connections for any signs of wear or leaks.