Alpine S Series Mono Channel Class D Car Amplifier - S2-A120M
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Alpine Next Generation S-Series mono car amplifier is designed for car audio enthusiasts looking to significantly upgrade their in-car sound system. Its key benefit is delivering robust power (up to 1200W) for speakers and subwoofers in a compact, versatile form factor. A potential caveat to consider is its reliance on specific impedance loads for maximum output, requiring careful matching with your speakers or subwoofer. This amplifier offers powerful sound enhancement with convenient features like automatic turn-on functionality.
All features
| Model Part Number | S2-A120M |
|---|---|
| Brand | Alpine |
Extended Product Information
FAQs
What is the maximum power output of the S2-A120M?
The amplifier delivers 600W RMS at 4 ohms and 1200W RMS at 1 or 2 ohms.
Do I need a remote turn-on wire for installation?
No, the amplifier features speaker-level inputs with automatic signal sensing, which allows it to turn on and off with your head unit, eliminating the need for a separate remote turn-on wire.
Can this amplifier power my front and rear speakers?
This is a mono channel amplifier, meaning it is designed to power a single channel, typically a subwoofer or a specific set of speakers. For front and rear speakers, you would need separate amplifiers.
What impedance loads can this amplifier handle?
The amplifier is designed to handle speaker impedance loads of 1 ohm, 2 ohms, or 4 ohms.
Is this amplifier efficient?
Yes, it utilizes Class D amplification technology, which is known for its high efficiency, resulting in less wasted energy as heat and more power delivered to your speakers.
How compact is the amplifier?
The amplifier is designed with a compact footprint to offer mounting versatility in various vehicle spaces where room may be limited.
Troubleshooting
Amplifier not turning on
Verify all power and ground connections are secure and correctly wired. Check the vehicle's fuse and ensure it is not blown. If using speaker-level inputs, confirm a signal is present from the head unit.
No sound or distorted sound
Check all speaker and RCA connections. Ensure the gain settings are appropriately adjusted. Verify the impedance load matches the amplifier's specifications and that the speakers are not damaged.
Amplifier overheating or shutting down
Ensure the amplifier is mounted with sufficient airflow and is not obstructed. Check speaker impedance; a load lower than recommended can cause overheating. Reduce playback volume to allow the unit to cool.
Intermittent operation or popping sounds
Inspect all wiring for loose connections, chafing, or corrosion. Ensure the ground wire is connected to a clean, bare metal surface on the vehicle chassis.
Pros and Cons
Pros
- Powerful output for its size
- Efficient Class D design reduces heat
- Compact for flexible installation
- Automatic turn-on feature simplifies wiring
- Versatile impedance handling (1, 2, or 4 ohms)
Cons
- Requires careful impedance matching for optimal performance
- Mono channel design limits multi-speaker configurations without additional amps
- May require professional installation for best results and safety
Setup, Compatibility & Care
Setup: Ensure the amplifier is mounted securely in a location with adequate ventilation. Connect power, ground, and speaker wires according to the product manual. Utilize the speaker-level inputs for simplified installation if your head unit does not have pre-amp outputs or a remote turn-on lead. Always consult a professional installer if you are unfamiliar with car audio wiring.
Compatibility: This amplifier is compatible with head units that have RCA pre-amp outputs or speaker-level outputs. It can drive subwoofers and speakers with impedances of 1 ohm, 2 ohms, or 4 ohms. Verify that your vehicle's electrical system can support the amplifier's power draw.
Care: Keep the amplifier clean and free of dust, especially around the heatsink fins, to ensure proper heat dissipation. Avoid exposing the unit to excessive moisture or extreme temperatures. Regularly check wire connections for security and corrosion.