Best current price£317.23from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£317.23Visit shop Sealey Hydraulic Hand Pump 10 000Psi
Visit shop
B&Q£325.96Visit shop B&Q - Re110 Hydraulic Hand Pump Without Hydraulic Hose 10,000Psi
Visit shop6 offers from £317.23 - £346.95
View price history by clicking the chart icon.
The Sealey Hydraulic Hand Pump (Model No. RE110) is designed for professionals needing precise control over hydraulic systems. Its key benefit is the 2-stage pumping action, which reduces effort and time to reach full pressure. A potential caveat is its 9.8kg weight, requiring stable placement for safe operation. This manual pump offers a 2300ml oil reserve and a 3/8" outlet, making it versatile for various hydraulic applications like body repair kits, presses, and rams.
| Brand | Sealey |
|---|
Consult the product manual or the manufacturer of your hydraulic cylinder/ram for the recommended hydraulic fluid type. Generally, a high-quality hydraulic jack oil is suitable.
No, this model (RE110) does not include hydraulic hoses. Hoses with appropriate fittings and pressure ratings must be purchased separately.
The pump typically features a selector lever or knob. The first stage is for rapid approach, and the second stage engages for high-pressure force application. Refer to the product manual for specific operational details.
This Sealey hydraulic hand pump is rated for a maximum output of 10,000psi.
Yes, this pump can be used for lifting applications when connected to a suitable hydraulic ram or cylinder designed for lifting.
The pump has a generous oil reserve capacity of 2300ml.
Keep the pump clean and store it in a dry place. Periodically check and maintain the hydraulic fluid level and condition. Inspect for any signs of wear or damage before each use.
Check hydraulic fluid level. Ensure all connections are tight and leak-free. Verify that the 2-stage selector is engaged correctly. Check for blockages in the intake or outlet lines.
Air may be present in the system; bleed the system according to hydraulic cylinder instructions. Ensure the pump is being operated smoothly and at the correct angle. Check for leaks at fittings or seals.
Verify the pump is on a stable surface and not binding. Check hydraulic fluid level and quality; low or degraded fluid can increase resistance. Ensure the 2-stage mechanism is functioning correctly.
Tighten the fitting connection securely. If the leak persists, inspect the O-ring or seal on the hose fitting and replace if damaged.
Setup: Ensure the pump is placed on a stable, level surface before operation. Connect your hydraulic cylinder or ram to the 3/8" outlet using appropriate high-pressure hydraulic hoses (sold separately). Verify that the hydraulic fluid level in the reservoir is adequate; refill if necessary with the recommended hydraulic oil type. Before first use, it's advisable to cycle the pump a few times to purge any air from the system.
Compatibility: The pump is designed to work with most standard hydraulic cylinders and rams. The 3/8" outlet offers broad compatibility. Ensure any hoses used are rated for the 10,000psi output of this pump.
Care: After use, clean the exterior of the pump with a dry or slightly damp cloth. Store the pump in a clean, dry environment. Periodically check the hydraulic fluid level and condition, topping up or replacing as per the manufacturer's recommendations. Inspect hoses and fittings for wear or damage before each use.
