Best current price£10.04from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£10.04Visit shop Liberon 126833 Easy French Polish Clear 250Ml
Visit shop
The Range£15.01Visit shop Liberon Easy French Polish Clear 250Ml - Shellac And Resin Blend - Ideal For Wood Finishing - Clear
Visit shop10 offers from £10.04 - £16.95
View price history by clicking the chart icon.
Liberon Easy French Polish Clear 250ml is designed for hobbyists and furniture restorers working on small wooden surfaces (1m² or less), offering a quick way to enhance the natural beauty of wood with a clear, natural finish. While it provides excellent results for beginners and is ideal for rare woods, its suitability is limited to smaller projects due to its formulation.
| Model Part Number | 126833 |
|---|---|
| Brand | Liberon |
The product provides coverage of approximately 8-10m² per litre, but it is best suited for small surfaces of 1m² or less for optimal results.
No, Liberon Easy French Polish is best suited for interior use only.
Each coat typically dries in 3-4 hours, depending on ambient conditions.
It is ideal for furniture, carved woodwork, and artifacts, particularly those made from rare or exotic woods where a natural effect is desired.
Brushes and tools should be cleaned immediately after use with methylated spirit.
Yes, provided the old finish is sound. Clean the surface thoroughly and apply thin coats. If the old finish is damaged or incompatible, it may need to be removed first.
Ensure you are applying thin, even coats. If brush marks are present once dry, you can lightly sand them down with very fine grit sandpaper and apply another thin coat.
Apply thinner coats and ensure the brush is not overloaded. Maintain a consistent application direction. Allow adequate drying time between coats.
This can indicate moisture trapped in the finish. Ensure the surface and atmosphere are dry during application and drying. Allow more time for each coat to cure fully.
Check ambient temperature and humidity; high humidity or low temperatures can slow drying. Ensure coats are thin enough. Avoid applying over incompatible finishes.
Lightly de-nib between coats with very fine sandpaper (e.g., 400-grit or higher) after the finish is completely dry. Ensure the surface was adequately prepared before the first coat.
Preparation: Ensure the wooden surface is clean, dry, and free from dust, grease, and old finishes. Lightly sand if necessary and wipe clean.
Application: Apply using a soft brush in thin, even coats. Allow each coat to dry for 3-4 hours before applying the next. For best results, multiple thin coats are recommended over fewer thick ones.
Compatibility: Suitable for most interior wood surfaces, particularly effective on furniture, carved woodwork, and artifacts. Best suited for rare or exotic woods where a natural finish is desired.
Tool Cleaning: Clean brushes and equipment immediately after use with methylated spirit. Ensure spills are wiped up promptly.
Care: Avoid prolonged contact with heat or liquids, as the finish can be sensitive. Wipe clean with a slightly damp cloth and dry immediately.
