Blackbird Swingarm Stickers For Beta RR 125 2018-2026 - Grey

The Blackbird Swingarm Stickers for Beta RR 125 2018-2026 provide a durable and stylish upgrade fo...

Best current price£17.99from GhostBikes.com

All Offers

3 offers from £17.99 - £29.22

View price history by clicking the chart icon.

GhostBikes.comBlackbird Gray 5B03n - Swingarm Stickers For Beta Rr 125 2018-2026 - Grey
£3.99 delivery
£17.99
Visit shop
eBayAdhesives Tilting BLACKBIRD beta RR for Moto Spare Parts Accessories Pieces
£16.93 delivery
£20.59
Visit shop

Product Information

Full details

Designed specifically for Beta RR 125 owners from 2018 to 2026, the Blackbird Swingarm Stickers offer an easy way to refresh your motorcycle's aesthetic while providing a protective layer for the swingarm finish. These decals are ideal for riders who want to maintain a clean, factory-inspired look, though they require careful alignment during application to ensure a smooth, bubble-free finish.

All features

ColourGrey
Model Part Number5B03N
BrandBlackbird

Extended Product Information

FAQs

Will these fit a Beta RR 250 or 300?

These are specifically designed for the Beta RR 125 swingarm geometry. While they may physically stick to other models, the fitment is not guaranteed to be exact.

Can I remove the stickers later?

Yes, they can be removed. Applying heat with a hair dryer before peeling will help soften the adhesive and minimize residue.

Do I need any special tools for installation?

No special tools are required, but a clean microfiber cloth, isopropyl alcohol, and a plastic squeegee are highly recommended for the best results.

Are they resistant to power washing?

They are designed to be durable for off-road use, but you should avoid pointing a high-pressure nozzle directly at the edges of the stickers to prevent lifting.

Is the set enough for both sides of the bike?

Yes, the product is sold as a pair, providing enough coverage for both the left and right sides of your motorcycle.

Troubleshooting

Sticker edges are lifting after a few rides

The surface was likely not cleaned well enough before application. Use isopropyl alcohol to remove all residue and apply gentle heat from a hair dryer to reactivate the adhesive.

Air bubbles trapped under the decal

Use a small, sterilized needle to prick a tiny hole in the center of the bubble, then press the air out toward the hole with a soft cloth.

Pros and Cons

Pros

  • Specifically tailored for Beta RR 125 swingarms
  • Provides a protective layer against trail debris
  • Easy to install with basic preparation
  • Durable enough for regular off-road use

Cons

  • Requires a clean, dry surface for optimal adhesion
  • Single color option (Grey) may not match all custom graphics kits
  • Surface must be free of wax or oil for long-term hold

Setup, Compatibility & Care

To ensure maximum longevity, follow these setup guidelines:

  1. Clean: Use a degreaser or isopropyl alcohol to thoroughly clean the swingarm surface. Any remaining wax or oil will prevent the adhesive from bonding.
  2. Dry: Ensure the metal is completely dry before attempting to apply the sticker.
  3. Apply: Peel the backing slowly and align from one end to the other, using a squeegee or a soft cloth to press out any air bubbles.
  4. Cure: Allow the adhesive to set for at least 12-24 hours before riding or washing the bike.

Compatibility is limited to Beta RR 125 models produced between 2018 and 2026. Avoid using harsh chemical solvents directly on the stickers during future bike maintenance to prevent lifting or fading.

Price History

DatePrice
Visit shop