Powercool Smart UPS 1000VA/600W - PC 1000VA

Best current price£79.99from Scan Computers
Best offers
Shopping.co.uk recommended and popular offers
Scan Computers£79.99Visit shop Powercool 1000Va Uninterruptable Power Supply Pc 1000Va
Visit shop
Best current price£79.99from Scan Computers
Shopping.co.uk recommended and popular offers
Scan Computers£79.99Visit shop Powercool 1000Va Uninterruptable Power Supply Pc 1000Va
Visit shop1 offer from £79.99
View price history by clicking the chart icon.
2 offers from £94.30 - £120.00
View price history by clicking the chart icon.
The Powercool PC 1000VA is a Line-Interactive Uninterruptible Power Supply (UPS) designed for home and small office users seeking reliable backup power and surge protection for essential electronics. Its primary benefit is ensuring uninterrupted operation during power outages and protecting against voltage fluctuations. A potential consideration is the included software monitoring is accessed via a serial number on the CD sleeve, which may require careful handling.
| Model Part Number | PC 1000VA |
|---|---|
| Brand | Powercool |
At full load (600W), the typical backup time is approximately 20 minutes. At half load, it provides around 15 minutes of backup.
The UPS features 6 AC outlets, allowing you to connect multiple devices. It also has 2 RJ45 ports for network protection and 1 USB port for computer connectivity.
The Powercool PC 1000VA uses two 12V7AH Sealed Lead Acid (VRLA) batteries.
Yes, software monitoring is included. The serial number required for installation is provided on the sleeve of the included Resource CD.
Yes, the Powercool PC 1000VA is compatible with generators.
AVR stands for Automatic Voltage Regulation. It helps to stabilize the incoming voltage, boosting low voltages and reducing high voltages, thereby protecting your connected equipment from damage caused by power fluctuations without using battery power.
The surge energy rating is 320 Joules, indicating its capacity to absorb and dissipate sudden energy surges, protecting connected electronics.
Ensure the input power cable is securely connected to both the UPS and a working wall outlet. Verify that the batteries are correctly installed and charged. If the unit has been stored for a long time, it may require an initial charge.
This usually indicates a power problem. Check if the unit is on battery power (mains failure) or if there is an overload. Remove non-essential devices from the UPS outlets. Consult the manual for specific alarm codes.
Check that the UPS is turned on and powered from the mains or battery. Ensure devices are plugged into the UPS outlets, not the surge-only protected outlets if separate. Verify the UPS is not overloaded.
Confirm the USB cable is properly connected to both the UPS and the computer. Ensure the monitoring software is installed correctly and the serial number from the CD sleeve is entered accurately. Restart both the UPS and the computer.
Batteries degrade over time. If the UPS is old, the batteries may need replacement. Reduce the load on the UPS by disconnecting non-essential devices. Ensure the batteries are fully charged by leaving the UPS connected to mains power for at least 8 hours.
Setup:
Compatibility:
Care: