Setup, Compatibility & Care Instructions
Compatibility:
This waste toner collection box is specifically designed for the following Toshiba E-Studio printer models:
- Toshiba E-Studio 3525 AC
- Toshiba E-Studio 5525 AC
- Toshiba E-Studio 2525 AC
- Toshiba E-Studio 4525 AC
- Toshiba E-Studio 6525 AC
- Toshiba E-Studio 3025 AC
Setup & Replacement:
- Power Off and Unplug: Before replacing the waste toner box, ensure the printer is powered off and unplugged from the power source for safety.
- Locate the Waste Toner Box: Refer to your Toshiba E-Studio printer's user manual to identify the exact location of the waste toner collection box. This is typically an easily accessible compartment.
- Remove the Old Box: Carefully slide out the old waste toner box. It may contain residual toner, so handle it gently and avoid tilting it excessively.
- Prepare the New Box: Unpack the new Toshiba TB-FC425E waste toner box. Remove any protective seals or covers as indicated in the printer's manual.
- Insert the New Box: Align the new waste toner box with the slot and slide it firmly into place until it clicks or is fully seated.
- Close Compartment and Power On: Close any access doors, plug the printer back in, and power it on.
- Follow On-Screen Prompts: The printer may prompt you to confirm the replacement. Follow any on-screen instructions.
Care:
This is a consumable part designed for collection. Do not attempt to clean or reuse the waste toner box. Once full or when the printer indicates replacement is needed, it should be replaced with a new, genuine Toshiba unit. Dispose of the old unit responsibly according to local electronic waste regulations.