Best current price£192.00from eBay
Shopping.co.uk recommended and popular offers
eBay£192.00Visit shop Mirka PROS 680CV 150mm Central Vacuum 8.0 Air Powered Random Orbital Sander
Visit shop3 offers from £192.00 - £210.00
View price history by clicking the chart icon.
The Mirka PROS 680CV is a professional-grade pneumatic tool designed for woodworkers, automotive technicians, and contractors who require high-performance stock removal. Its primary benefit is a high-efficiency dust extraction system that keeps work environments clean while maintaining a consistent 8.0mm orbit for rapid material removal, though it requires a high-capacity air compressor to operate at peak efficiency.
| Model Part Number | 8995680111 |
|---|---|
| Brand | MIRKA |
No, the Mirka PROS 680CV is a pneumatic (air-powered) tool and requires an air compressor to function.
The recommended operating air pressure is 6.2 bar (90 psi).
While it can be used for finishing, the 8.0mm orbit is optimized for stock removal; for delicate final sanding, a 2.5mm or 5.0mm orbit sander is generally preferred.
Yes, the tool comes equipped with a 150mm backing pad.
It is recommended to add a few drops of pneumatic oil before each daily use to maintain motor longevity.
Check your air compressor output and ensure the air hose has a wide enough diameter to supply sufficient volume (SCFM).
Inspect the backing pad for uneven wear or debris buildup. Replace the pad if the foam core is damaged.
Check that the abrasive holes are aligned with the backing pad holes and ensure the vacuum hose is securely connected to a functioning dust extractor.
To set up the tool, connect the 1/4 inch air inlet to a regulated, moisture-free compressed air line. Always apply a few drops of pneumatic tool oil into the air inlet before starting your shift to ensure internal vane lubrication. Compatibility is guaranteed with all standard 150mm 6-hole or multi-hole vacuum-ready abrasive discs. For care, wipe down the exterior casing daily to remove dust buildup, and periodically check the pad face for debris. If you notice a loss in suction, inspect the vacuum shroud and the internal dust channels for any compacted sanding residue.
