Veito Instantaneous Water Heater - Speed E 8.3kW - A
Best current price£149.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£149.99Visit shop B&Q - Speed E Instantaneous Water Heater8.3Kw
Visit shopB&Q£149.99Visit shop All Offers
4 offers from £149.99 - £157.00
View price history by clicking the chart icon.
Product Information
Full details
The Veito Speed E 8.3kW is designed for users needing instant, on-demand hot water without the space and energy demands of traditional storage tanks. Its key benefit is providing continuous hot water efficiently, with a caveat being that its 8.3kW power rating suits single or multipoint applications but may not be sufficient for very high simultaneous demand. This compact heater offers electronic temperature control, energy efficiency, and a sleek design, making it ideal for homes or light commercial spaces prioritizing convenience and space-saving.
All features
| Energy Efficiency | A |
|---|---|
| Model Part Number | Speed E 8.3kW |
| Brand | Veito |
Extended Product Information
FAQs
How many outlets can this heater supply hot water to?
The 8.3kW model is suitable for single-point applications (like one sink) or multipoint applications where simultaneous demand is low. For high simultaneous demand, a higher power model might be necessary.
What is the temperature range for the Veito Speed E 8.3kW?
The temperature can be precisely adjusted from 20°C to 55°C using the digital touch panel.
Does this heater require a storage tank?
No, this is a tankless instantaneous water heater. It heats water on demand, so no storage tank is required.
How energy efficient is this model?
It is rated Energy Efficiency Class A, meaning it is highly efficient and only heats water when needed, saving energy compared to traditional storage heaters.
Can I use this with a solar water heating system?
Yes, the Veito Speed E 8.3kW is designed to be eco-friendly and solar-compatible, making it suitable for integration with solar water systems.
What electrical requirements does this heater have?
Due to its 8.3kW power rating, it requires a dedicated, high-capacity electrical circuit. Professional installation is strongly recommended.
How do I clean the Veito Speed E 8.3kW?
Wipe the exterior with a soft, damp cloth. Avoid abrasive cleaners. Periodically check and clean the water inlet filter to maintain optimal performance.
Troubleshooting
No hot water when tap is opened
Check if the unit is powered on. Verify that the water flow is sufficient to activate the heater. Ensure the water inlet filter is not clogged. Confirm that the correct temperature is set on the control panel.
Inconsistent water temperature
Ensure the incoming water flow rate is stable and within the unit's operating range. Check if the temperature setting has been altered. If used for multipoint, ensure demand is not exceeding the unit's capacity. Clean any potential blockages in the heating element or pipes.
Unit not turning on
Verify that the unit is correctly connected to a live power source and that the circuit breaker is engaged. Check for any error codes displayed on the control panel.
Low water pressure at outlet
Check the water inlet filter for blockages. Inspect all connected plumbing for leaks or restrictions. Ensure the main water supply pressure is adequate.
Pros and Cons
Pros
- Provides endless hot water on demand.
- Space-saving tankless design.
- Energy efficient (Class A), heating only when needed.
- Precise electronic temperature control for consistent comfort.
- Modern and compact design complements various spaces.
- Suitable for integration with solar heating systems.
Cons
- 8.3kW power may limit simultaneous high-demand use.
- Requires a dedicated electrical circuit due to its power draw.
- Initial setup may require professional installation for optimal performance and safety.
- Relies on water flow to activate, so very low flow rates might not trigger heating.
- Temperature stability can be affected by fluctuations in incoming water temperature and flow rate.
Setup, Compatibility & Care
Setup: The Veito Speed E 8.3kW is designed for wall mounting. Ensure the installation location can support the unit's weight and is in proximity to water supply and a suitable electrical connection. Professional installation is recommended to ensure safety and compliance with local electrical codes, especially given the 8.3kW power requirement which necessitates a dedicated high-capacity circuit. Connect the cold water inlet and hot water outlet according to the manual's instructions.
Compatibility: This unit is compatible with standard plumbing connections. It is suitable for single-point applications (e.g., one sink) or multipoint applications where simultaneous demand is low. It is also compatible with solar water heating systems, allowing for enhanced energy efficiency.
Care: Regularly clean the exterior of the unit with a soft, damp cloth. Avoid abrasive cleaners. Periodically check the water inlet filter for any debris that might obstruct water flow and reduce performance; clean as needed. Ensure the surrounding area is free from obstructions to allow for proper ventilation.